Condensate drain trap
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- South Korea
- Brand name
- Acetrap15NS
- Payment Terms
- Others,T/T
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- auto trap, condensate drain trap, drain valve, drain trap
- Category
- Other Machinery Parts
ACE Corp.
South Korea
- Verified Certificate
-
16
| Product name | Condensate drain trap | Certification | CE |
|---|---|---|---|
| Category | Other Machinery Parts | Ingredients | - |
| Keyword | auto trap , condensate drain trap , drain valve , drain trap | Unit Size | 190.0 * 82.0 * 104.0 mm |
| Brand name | Acetrap15NS | Unit Weigh | 1 kg |
| origin | South Korea | Stock | - |
| Supply type | - | HS code | 84818010 |
Product Information
- Simple and Robust
- Zero air loss enables quick payback on investment. As a small size of use, it can also be applied to the field pipe lines and others. Test Key is built in, so you can check the operation at any time.
- Durable
- The internal diameter of the seal discharge is 7∅, so the small size pipe scale or foreign material is easily discharged. Life of Diaphragm verified 1 million times based on cold tap water. Once installed, it can be used for as long as a compressor.
Specification
| Model | Inlet | Outlet | Pressure (kg/㎤) | Temperature (℃) | Weight (Kg) | Vol (ℓ/h) | Comp(HP) | Size |
|---|---|---|---|---|---|---|---|---|
| ACETRAP15(L,N,H) ACETRAP15(L,N,H)C | 1/2" | 3/8" | L_1.2-4 N_4-10 H_10-16 | 0-60 | 1.2 | 3-50 | ~400 (50㎥/min) | W190 D82 H104 |
| ACETRAP20(L,N,H) ACETRAP20(L,N,H)C | 3/4" | 1/2" | L_1.2-4 N_4-10 H_10-16 | 0-60 | 2.3 | 20-100 | ~1000 (130㎥/min) | W219 D122 H128 |
There are two types of materials available : up to 60°C for NBR (oil injected) or at slightly higher temperatures for VITON (oil free).
If the diaphragm is damaged due to foreign material in the pipe, the air is continuously leaking into the discharge port. The right to use Pre-filter(strainer) as a solution to a problem.
Generally one million performance tests have been validated in clean and cold water environments.
Installation for Dryer and After-cooler
When installing at the after-cooler and dryer it may be necessary to install the equivalent tube but this can be difficult due to the construction of the on-site. In this case, you need to install a [Air Vent(speed controller)] to open the air very thoroughly to remove the air pocket to make the trap work. However, the air opening is very mild, but you must check the air when checking in the field. If the [Air Vent] is blocked, the trap will not work. These installations are equally applicable when the eqivalent pressures(balance tube) in the reservoir are severe. (Air Vent sold separately)
- Product Info Attached File
- Verified Certificate
-
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Others,T/T | Shipping time | Negotiable |
- President
- CHO WOON JAE
- Address
- 1052-10 Hwamok-dong,, Gimhae-si,Gyeongsangnam-do,
- Product Category
- Valves
- No. of Total Employees
- 1-50
- Company introduction
-
Ace corp. has dedicated innovative products with continuous developments to the customer's satisfaction. High quality, low price, no-need electricity is our targets and we have developed a perfect mechanism with simplicity through long period.
The best feature of Acetrap is simple mechanism with ball float sensing the level of condensate and controlling pilot air in the housing. When the shuttle valve is pulled back by depressurized pilot air, the condensate is drained out though a large discharge nozzle.
We have involved in condensates draining technique in compressed air for almost ten years covering R&D, manufacturing lines, marketing & after sales service. We offer a full range of solutions to your plants in condensate draining problems.
- Main Markets
-
Germany
Netherland
- Main Product
_2.jpeg "Cutting Rules_Center Bevel_Long Center Bevel _Double Bevel___1.")
