Function

Quick installation No electricity and control air Various application Corrosion resistant High capacity On mouse asterisked You can see the explanation

Specs

Technical Data

Caution

• Purchasing order, please note an "L" or "N" of applicable pressure.
• In addition Oil-free type is marked "C"

Diagram	Outlook
Filter Set Mesh hole 2.5~3 mm sus	Heater 220V, 1Phase, 120W/h Auto sensed type

Caution

• Connecting outlet linem please use pipe line over 10mm inner size without back pressure.

	Caution For stable installation, be sure to install balance line and use 8~10mm bronze pipe or high pressure hose. Connect blance line "T" from gauase at service tank like above picture. Application Air receiver tank, Turbo inter-cooler, after-cooler and head.
	Caution In the case of reciprocation compressorm, use flexble hose at point of inlet due to severe vibration. Application After-cooler, medium and large dryer, large filter and head.
	Caution In the case of condensate inlet is so low to the ground, be sure to use balance line, If not, it only be functioned by test key without automatic discharge condensate Application Service tank which inlet is so low to the ground.

HEATER

ACETRAP insatalled in service Vessel

Caution in maintenence

Attention

Before doing maintenance, depressurise the housing by push test key as it is always under pressure

Maintenance parts

• Ball float set : 1, 2, 3
• Test key set : 6
• Discharge set : 5
• Air chamber set : 4
• Etc overhauling set

• Please require the other sets except above parts to our sales agency or Ace corp.
• Information for shuttle valve parts exchange.
• If drain operate considerable times, you should exchange shuttle valve including discharge sets because shuttle valve coated by NBR or VITON rubber.

Trouble shooting

Please get ready for winter season

• During winter, we would like to recommend to install Heater manufactured by Ace corp. because ball float can be distorted in freezing-up, In that case, we can't offer free charge of service.