Description of Slag Remover

Slag Remover is made of many mixed minerals by filtering, crushing and hot working, the main mineral composition is SiO2. As a new type of composite casting material in cleaning metal surface, it is used in covering liquid metal, deslagging, and purifying during the process of casting. 

Features of Slag Remover

♦Rapidly gathered slag and debris in the liquid metal, efficient in deslagging, high finishing rate.

♦Isolate the contact between liquid metal and surrounding air, prevent oxidation of liquid metal  and heat loss.

♦Easy to disperse, spreading fast with even and strong film. Efficient in blocking slag when pouring liquid metal, high refractoriness, no fusing under high temperature, no production of  secondary slag. And also avoiding the entrance of fine slag or sludge into mold cavity, reducing  slag inclusion of the casting to increase overall yield of casting.

♦ Do not contaminate liquid steel, no dust in using, do no harm to workers’ health.

Model and applications of Slag Remover

Application of Slag Remover

Applied in medium frequency furnace, and cleaning process on the surface of liquid metal bag.

Use-Method of Slag Remover

When the liquid metal bag was filled, throw this product into the bag container evenly, immediately stir in with garbage rod from the bag margin to the center, and then pull out the rod. When covering casting, throw this product into the bag container evenly.

Packaging&Shipping 

Our Services 

1) In Jinaiyuan, customer first is always the highest standards for our actions.

2) For each client to provide the best solution is the fundamental principle of our service.

3)Providing customers with the most suitable products and the corresponding technique, to meet different requirements of different customers based on the different technical characteristics of each customer and product applications, materials and technical requirements,

4) We will provide technical support at any time when the problems arise in the process of using.

Quality Control of Slag Remover

Raw Material Selection:

To ensure the quality of our raw materials, we only purchase our raw materials from our longterm trusted suppliers. With every purchase, our quality control staff performs the first inspection at our supplier’s site. Once the raw materials arrive at our facility, our quality control team performs a second inspection on the batch. Each time raw materials enter our facility, they are inspected again prior to being accepted.

Process Quality Control:

From raw material to final product, our process control inspectors ensure that our procedures are consistently and correctly applied each step of the way. In addition to rigorous process control, our quality control team inspects the output of each process to ensure material quality and consistency. In each of our workshops, our employees understand that the output of their workshop is the input for the next manufacturing department. Therefore they have been trained to always carefully inspect the previous workshop’s work and be responsible for their own output.

Company Information 

1)We are manufacture

We produce nearly hundred kinds of products which belong to more than a dozen series, covering foundry spherical porcelain sand, coating, furnace lining, deslagging agent, cover agent, recarburization agent, resulfurization agent and desulfurization agent, etc. 

^{Any problem, please do not hesitate to contact with me.}