Welding coupler(technology transfer)

Welding coupler(technology transfer)

Seismic-risistant rebar connection of Welding Coupler


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
South Korea
Payment Terms
T/T
Production method
Available
Shipping / Lead Time
Negotiable / Negotiable
Keyword
soldering supplies, technology transfer, welding coupler, seismic-risistant rebar
Category
Other Welding & Soldering Supplies

Welding Coupler Co., Ltd.

Membership
PRO
Country / Year Established
South Korea South Korea / 2021
Business type
Manufacturer
Verified Certificate

2

DUNS

Product name Welding coupler(technology transfer) Certification -
Category Other Welding & Soldering Supplies Material -
Keyword soldering supplies , technology transfer , welding coupler , seismic-risistant rebar Unit Size -
Brand name - Unit Weigh -
origin South Korea Stock 0
Supply type Available HS code -

Product Information

 

 

We tested performance of the welding coupler that is briefly described in the previous page. The test material was SD600 rebar. However, the Ministry of Land, Infrastructure& Transport or the Construction Association of Korea notes that rebar in the category of SD600 or higher is not suitable to be bonded by welding. According to them, 

SD600 rebar contains over 0.3% carbon for the purpose of strength improvement, and that ingredient reacts with O₂ in the atmosphere, resultantly forming a great deal of CO₂ bubbles.  

In a situation that shaking by earthquake or other external force takes place, by the way, the CO₂bubbles put out triaxial tensile force that may cause the breakdown of rebar. This is why there’s regulations on bonding by welding rebar which has a substantial amount of carbon in content in order to improve strength. This company’s welding coupler performs melting and bonding rebar at 1800A and for less than 1 second. This way ensures nearly ‘zero’ formation of bubbles like shown in a relevant image as above. 

Meanwhile, the melting and bonding process decreases the tensile strength of SD600 rebar from 780~840N/mm2(Newton) by 50~80N/mm2 to 720~760N/mm2 because the process is naturally followed by annealing, 

that is, post-welding slow cooling. In order to increase its strength, generally, SD600 rebar should go through rolling at 850~880℃ and then quenching by water cooling at 680~740℃.

Anyway, tensile strength decrease as mentioned above can be solved by structural design involving rebar addition only if the material has no bubble-related defect. The most important thing is to ensure earthquake-roofness, which needs satisfying the condition of residual distortion, that is, tensile slip of 0.3mm or below, according to ICE-ES Regulations. The satisfaction means, in other words, that initial tensile slip is found ‘zero’ as a result of low-frequency or tensile strength test. That result is achievable only by the welding coupler.  

The initial tensile slip of 0.3mm or below is essential for earthquake- resistant performance. Taking an example of building an apartment, pillars of the apartment are supposed to be complete with rods of rebar joined inside, and concrete deposited and cultured outside. 

Here, the rebar and the concrete would respectively endure tensile force and compressive load. By the way, if the rebar is shaken by external  force  like  earthquake  and  then  lengthened  by  over 0.3mm, the concrete comes off so that it can’t endure compressive load any more. In this case, resultantly, the apartment falls down or collapses. 

 

 

 

 

Our welding coupler that is described so far belongs to standard type. We have one more type of welding coupler. It’s flux type. The two types are so quite similar to each other. The difference is that welding coupler of flux type doesn’t use inert gas to realize zero bubbles unlike in the other type. Through a new process of filling the ceramic coupler with our developed flux and then welding using the automatic welding jig system. the flux type puts out 

rebar which has zero-bubble section and the tensile strength of 720~780N/mm2.

 

 

 

 


Welding Coupler of Standard Type

 


Welding Coupler of Flux Type

 

 

B2B Trade

Price (FOB) Negotiable transportation Negotiation Other
MOQ Negotiable Leadtime Negotiable
Payment Options T/T Shipping time Negotiable

Welding Coupler Co., Ltd.

Country / Year Established
South Korea South Korea / 2021
Membership
PRO
Business type
Manufacturer

2

DUNS

President
Young Tae Hwang
Address
7, Saebyeok-ro 215beon-gil, Sasang-gu, Busan, Korea
Product Category
Other Welding & Soldering Supplies
Year Established
2021
Company introduction

 

Main Markets

China China

Japan Japan

U.S.A U.S.A

Main Product

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My TK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more