_2.jpg)
_2.png)
_3.png)
_4.png)
_5.png)
Style NEO - A31C (FFF type Desktop 3D Printers)
Experience high-quality output with the best-in-class size (310X310X310mm)
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- South Korea
- Brand name
- Cubicon
- Payment Terms
- T/T
- Production method
- OBM,ODM,OEM
- Shipping / Lead Time
- Negotiable / Negotiable
- Category
- Other Consumer Electronics
South Korea
| Product name | Style NEO - A31C (FFF type Desktop 3D Printers) | Certification | CE |
|---|---|---|---|
| Category | Other Consumer Electronics | Material | 3D FILAMENT FOR 3D PRINTER,3D PRINTER,LAN CABLE,POWER CORD,SPOOL HOLDER,TOOL BOX |
| Keyword | desktop 3d printer , style neo , fff 3d priter , cubicon 3d printer | Unit Size | 720.0 * 760.0 * 870.0 mm |
| Brand name | Cubicon | Unit Weigh | 70 kg |
| origin | South Korea | Stock | 30 |
| Supply type | OBM,ODM,OEM | HS code | 8477591000 |
Product Information
Style NEO
Was the small 3D printer annoyed?
Experience high-quality output
with the best-in-class size (310X310X310mm)
“Style NEO A31C”
Greater output size allows a larger 3D model to be printed at once
With the new Build Size lineup, the Cubicon Style NEO-A31C has expanded the bed size as well as has increased output volume by approximately 324% compared to Style Plus-A15CR. Depending on your purpose, you can print more various sizes of 3D models.
Real-time monitoring and remote control with a built-in camera
With the built-in camera inside the Cubicon Style NEO, you can check the output process not only on the touchscreen at the front but also on your computer or smartphone. Also, if an output error or failure is identified, the output situation can be controlled through network remote control. (power stop and restart, etc.)
* Network remote control will be applied upon completion of development.
* Network remote control will be applied upon completion of development.
Auto-Leveling Plus creates high-quality output
The flatness of the bed on which the build is printed and the spacing between nozzles are important factors in determining the quality of the output.
Style NEO delivers Auto-Leveling with precision within 10μm by applying the industrial load cell, it reduces height error failures during printing and provides the user with the best-in-class output quality.
Style NEO delivers Auto-Leveling with precision within 10μm by applying the industrial load cell, it reduces height error failures during printing and provides the user with the best-in-class output quality.
An easy detachment of output with the specially coated heating bed with insulation
The heating bed of CUBICON Style NEO is specially coated to allow the output to start immediately without separate adhesive or masking tape,
as well as to be easily separated after the output, providing the best output quality. It's guaranteed. Besides, thermal efficiency was improved by applying insulation to the bottom of the heating bed.
Enhanced usability with stainless nozzle kit
Equipped with the stainless nozzle kit patented by Cubicon has enhanced usability and minimized the probability of failure. Different from a typical nozzle kit with a tube attached, it is connected with a stainless steel pipe to provide excellent performance even in hot output materials.
* To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.
* To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.
First in Korea, equipped with the self-designed replaceable Nozzle Kit Extruder
Most output problems can be easily maintained by simply replacing the nozzle kit fitted to the Extruder, so it is designed to make it easy for anyone to attach/detach the nozzle kit without extruder disassembly, even if an extruder replacement is required. As it is self-replaceable without waiting for customer service, it reduces maintenance costs and allows output without time-consuming.
The automatic filament feeder with built-in two rollers
The automatic filament feeder with built-in two rollers allows a more stable filament supply to significantly improve ease of use. In addition, with the contactless optical sensor, it automatically stops the output when there is a supply problem due to filament exhaustion or breakage and reduces output time and saves material waste dramatically by allowing the output to continue when reconnected.
* To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.
* To maintain quality and minimize maintenance, it is recommended that filaments from other companies are separated from the extruder and used.
Various filament outputs are available with a single extruder
Cubicon Style NEO allows you to print ABS, PLA, PETG, and TPU filaments, as well as special engineering featured filaments, such as low-shrinkage ABS, high-strength PLA, and PC with a single extruder, giving customers the convenience and a great opportunity to experience a variety of materials.
Applied the NFC system that automatically recognizes the filament type
You can check the type and usage of filaments through the NFC system. Depending on the filament type recognized, the service temperature (nozzle, bed) is automatically set to prevent material-specific output conditions from failure. In addition, the user can easily check the usage of the filament on the front touchscreen and replace it at proper timing.
* This function is available when using a Cubicon filament that applied the NFC.
* This function is available when using a Cubicon filament that applied the NFC.
With the power failure compensation feature, uninterrupted output even after power-off
The Cubicon Style NEO uses the power failure compensation feature to prevent data damage and output errors that may occur in the event of a power outage or accidental work stop. (the power requires to be recovered in 5 minutes)
As the MCU Board always monitors the nozzle position, it can continue high-quality output even after the power disconnecting of the 3D printer.
* Depending on the material or model, it may be difficult to resume the output due to the lifting caused by floor shrinkage.
As the MCU Board always monitors the nozzle position, it can continue high-quality output even after the power disconnecting of the 3D printer.
* Depending on the material or model, it may be difficult to resume the output due to the lifting caused by floor shrinkage.
Enhanced output stability with the belt idler and cable carrier.
The Cubicon Style NEO has applied a cable bear with industrial facility specifications to prevent free movement and twisting between cables. Also, by applying a belt idler, which is an essential part of a large 3D printer, maintains consistent belt tension for a long time to ensure high-quality 3D printing.
Chamber-type structure of the aluminum frame improves output stability
With a chamber-type structure of the aluminum frame, Cubicon Style NEO improves output stability by blocking external influences. A sealed structure that minimizes internal vibration and output noise allows users to use the 3D printer comfortably at home, in private offices, or in educational environments.
Dual 3 layered Air Filter for Safe Printing Environments
Equipped with the triple-clean filter (Hepa, Carbon, Purafil Catalyst Filter) of High Vision Systems that acquired major Korean and international certifications (CE, KC, FCC, etc.), it blocks dust, gas, and odors generated during the FDM 3D printer printing and makes printing safer.
Easy and fast output by connecting dedicated slicing S/W and Wifi
The free slicing SW 'Cubicreator' optimized for the Cubicon 3D printer provides faster and more accurate printing experience with an upgraded option setting and interfaces for user's convenience.
In addition, by connecting the PC running the slicing SW and Cubicon Style Neo via Wifi, making output quick and easy without USB.
In addition, by connecting the PC running the slicing SW and Cubicon Style Neo via Wifi, making output quick and easy without USB.
7-inch touchscreen equipped with user-centered GUI
The 7-inch full-color touchscreen with Korean∙English UI allows even beginners to easily operate it and to check the various information (output status, equipment information, material information, printer information, etc.) simply.
- Product Info Attached File
- Verified Certificate
-
B2B Trade
| Price (FOB) | Negotiable | transportation | Air Transportation,Express,Negotiation Other,Ocean Shipping |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | T/T | Shipping time | Negotiable |
- President
- Doowon Choi
- Address
- 527 Dunchon Daero, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
- Product Category
- Other Consumer Electronics
- Year Established
- 2017
- No. of Total Employees
- 1-50
- Company introduction
-
Cubicon started with the goal ofcontributing to individuals and companies engaged in creative developmentactivities. Cubicon derives from two words ‘Cubic’ meaning regular hexahedronin a perfect form and ‘On’ which means activation and vitalization. Itsignifies that all objects can be configured perfectly by Cubicon. Based on HyVISION’s precision equipment manufacturingtechnology and experience, the company believes that it can contribute to andcan do better than other competitors in the 3D printer field.
It offers unlimited services in the fieldof 3D Printer, Materials, Software, 3D printing, and is aiming to become theTotal 3D Printing Solution Provider. It seeks to more easily and quicklyutilize 3D printers and study core technologies by integrating varioustechnologies. In the last 5 years, it has developed 3D printers in-house andsupplied more than 10,000 units in Korea contributingto the spread of 3D printers. It holds a perfect 3D printer with an auto-levelingsystem, special coating bed technology, and triple filter applied based onvision recognition and precision movement control technology from HyVISION, a parent company, and are developedindependently. Cubicon leads 3D printers manufacturing due to its technologicalsuperiority.
- Main Markets
-
Canada
Germany
Netherland
Singapore
Turkey
U. Kingdom
Viet Nam
- Main Product
__2.png "Style NEO _ A15CR _FFF type Desktop 3D Printers_ _1")
_2.png "Style NEO _ A22C _FFF type Desktop 3D Printers__3")
_2.jpg "Style NEO _ A31C _FFF type Desktop 3D Printers__1")
