This is an air purifier mask that can be used permanently if you replace the filter. The use of a certified H13 Hepa filter protects the respiratory system by blocking 99.979% of harmful substances and infectious agents of particles greater than 0.3 micrometer. Ergonomically designed facial mask silicone is perfectly adhered to the face to block fine matter. The 18,600 rpm high-performance quiet motor provides a constant air supply that prevents sweat from the mask or moisture from the glasses and provides a pleasant breathing experience.

- The ergonomically designed AirproM prevents micro-contaminants from entering the mask because when worn, it closes and does not create a gap.

- AirproM uses an H13 grade HEPA filter to effectively remove up to 99.979% of fine contaminants larger than 0.3 μm.

- A fan motor is installed inside the mask to continuously supply fresh air from the outside, enabling comfortable breathing, and preventing discomfort or fogging due to moisture generated during breathing.

- The controller configured together is responsible for controlling the power and air flow of the mask, and the air flow to the mask can be adjusted in three stages. Weak, medium and strong. It is a rechargeable product and can be used for about 4 hours per day. (It may vary slightly depending on the flow rate used.)

- The filter can be used for 72 hours (pure usage time) and can be used for about 1 month depending on the user environment. The old filter can be discarded and replaced with a new one. The mask body can be used semi-permanently, and it is very economical for long-term use by changing only the filter.

[FILTER]

- This filter is a replacement part of the wearable air purifier mask (AirproM)

- As a H13 grade HEPA filter, it can remove 99.979% of micro contaminants over 0.3μm

- The filter cannot be reused and should be used after replacing it with a new one in case of severe filter contamination

- If the filter is wet or contaminated, replace it with a new one

- This filter cannot be used alone. It should be used with AirproM

[FACE SILICON]

- This product is a replacement part of wearable air purifier mask.

- The ergonomically designed silicone ensures that the mask fits perfectly on the face without any gaps, preventing micro-pollutants from entering the gaps.

- If it is contaminated with a washable product, it can be lightly wiped with a neutral detergent and used after drying.

- If silicone is difficult to use due to tearing, deformation, etc., it should be replaced with a new product.