Photo Ionisation Detector - PID-AH2
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- China
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- gas sensor, electrochemical gas sensors
- Category
- Electrical Supplies
ISweekcom
- Verified Certificate
-
8
| Product name | Photo Ionisation Detector - PID-AH2 | Certification | - |
|---|---|---|---|
| Category | Electrical Supplies | Ingredients | - |
| Keyword | gas sensor , electrochemical gas sensors | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | China | Stock | - |
| Supply type | - | HS code | - |
Product Information
Photo Ionisation Detector - PID-AH2
Target gases VOCs with ionisation potentials < 10.6 eV
Minimum detection level ppb isobutylene 1
Linear range ppm isobutylene 3% deviation 50
Overrange ppm isobutylene 50
Sensitivity linear range mV / ppm Isobutylene > 20
Full stabilisation time minutes to 20 ppb 20
Warm up time seconds time to full operation 5
Offset voltage mV variable between detectors 46 to 60
Response time (t90) seconds diffusion mode < 3
- Model Number: PID-AH2
Category： Sensors | Gas Sensors | Electrochemical Gas Sensors
Product Specification
Figure 1 PID-AH2 Schematic Diagram
1. Do not obstruct Ø3.5 sensing area
2. Seal between Ø6.2 and Ø9.0 (if different to atmosphere)
3. Pin out details:
Pin 1: + V supply (See note 5)
Pin 2: Signal output
Pin 3: 0V supply
4. All dimensions ±0.1mm unless otherwise stated
5. Input voltage selector hole:
a) When filled with solder the onboard regulator is disabled.
A regulated supply of 3.0 - 3.6V (typically 3.3V) is then required.
b) When not filled with solder the onboard regulator is enabled.
A regulated or unregulated supply between 3.6 - 10 V is then required
for IS applications, or up to 18 V for non-IS applications.
Nomally shipped with regulator enabled
PERFORMANCE |
|
|
|
||
|
Target gases |
VOCs with ionisation potentials < 10.6 eV |
|
||
|
Minimum detection level |
ppb isobutylene |
|
1 |
|
|
Linear range |
ppm isobutylene |
3% deviation |
50 |
|
|
Overrange |
ppm isobutylene |
|
50 |
|
|
Sensitivity |
linear range |
mV / ppm Isobutylene |
> 20 |
|
|
Full stabilisation time |
minutes to 20 ppb |
20 |
||
|
Warm up time |
seconds |
time to full operation |
5 |
|
|
Offset voltage |
mV variable between detectors |
46 to 60 |
||
|
Response time (t90) |
seconds |
diffusion mode |
< 3 |
|
|
|
|
|
|
|
|
ELECTRICAL |
|
|
|
|
|
Power consumption |
85 mW (max) at 3.2 V, 300 mW transient for 200 msec on switch-on |
|
||
|
Supply voltage |
3.2 to 3.6 VDC |
Ideally regulated ±0.01V (onboard regulator disabled) |
|
|
|
|
3.2 to 10 VDC |
(onboard regulator enabled) |
|
|
|
|
(maximum 10V for IS approval, maximum 18 V for non-IS) |
|
||
|
Output signal |
Offset voltage (minimum 46 mV) to Vmax |
|
||
|
|
(Vmax = Vsupply -0.1 V when regulator is enabled) |
|
||
|
|
|
|
|
|
|
ENVIRONMENTAL |
|
|
|
|
|
Temperature range |
-40ºC to +55ºC (Intrinsically Safe); -40ºC to +65ºC (non-IS) |
|
||
|
Temperature dependence |
0°C to 40°C |
90% to 100% of signal at 20°C |
|
|
|
|
-20°C |
140% of signal at 20°C |
|
|
|
Relative humidity range |
Non-condensing |
|
0 to 95% |
|
|
Humidity sensitivity |
During operations: 0% to 75% rh transient |
near zero |
||
|
|
|
|
|
|
|
KEY SPECIFICATIONS |
|
|
|
|
|
Operating life |
5 years (excluding replaceable lamp and electrode stack) |
|
||
|
IS Approval |
IECEx Ex ia IIC T4; ATEX Ex ia II 1G -40ºC < Ta < +55ºC (< 10VDC supply) |
|
||
|
Onboard filter |
To remove liquids and particulates |
|
||
|
Lamp |
User replaceable |
|
||
|
Electrode stack |
User replaceable |
|
||
|
Error state signal |
Lamp out: 35 mV |
|
||
|
Weight |
< 8g |
|
|
|
|
Position sensitivity |
None |
|
|
|
|
Warranty period |
Electronics and housing: 24 months |
|
||
|
|
Lamp and electrode stack are user replaceable. 10.6eV lamp: 5,000 lit hours |
|||
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
- President
- qiulonny
- Product Category
- Sensors
- Year Established
- 2013
- Company introduction
-
<p>
ISweek is the industry sourcing and direct marketing platform launched by OFweek, Chinese high-tech web portal. ISweek has gathered abundant high-quality industrial products around the world, and is dedicated to providing one-stop product distribution and procurement services for buyers, suppliers, traders, and manufacturers of industrial technology products.
OFweek is a comprehensive web portal in Chinese high-tech industry with over 2 million members across various fields; its information covers a wide range of high-tech fields, including lighting, LED, solar PV, optical communication, laser, optics, display, electronics engineering, industrial control, robot, smart grid, instrument and meter, sensor, energy conservation and environmental protection, wind power, power supply, lithium battery, electric power, telecommunication, Internet of Things (IOT), cloud computing, 3D printing, smart home, wearable device, new energy vehicle, and medical technology, etc. OFweek can provide advertisement, data, activity, conference, webinar, domestic and foreign trade B2B, HR, industrial research report, industry consulting, investment and financing as well as other services; and it’s becoming the fastest growing industrial comprehensive e-commerce platform in China.
Technology changes the world. ISweek and OFweek are always working together with those excellent partners, to become the most valuable partnership of our customers.
HOT product: Sensor, Gas Sensor, Co2 Sensor, Humidity Sensor, Temperature Sensor, Pressure Sensor, UV Sensor, Air Quality Sensor
- Main Markets
-
U.S.A
- Main Product
_2.jpg "FeelingPen_ Digital Pen_ Accessories_ Edutech_ IoT_ Stylus__1")
