The VersaCAMM Series is highly versatile for an endless range of applications. With just one device, you can produce decals, labels, stickers, posters, POP, vehicle wraps, heat transfers for apparel decoration and other promotional items of any size, on demand for both indoor and durable outdoor display. Use a wide variety of media, including adhesive-back vinyl, banner, paper, film, tarpaulin and heat transfer paper.

With the VersaCAMM, you can achieve professional quality results even without any previous experience. Roland Intelligent Pass Control technology automatically delivers the smooth gradations and flawless solid colors you require. It also increases your productivity. The VersaCAMM VP-i series is a full 80 percent faster than the previous model in standard mode.
*¹ New environmentally-friendly FPG2 aqueous ink is also available for the VP-540i/300i.
*² ECO-SOL MAX ink produces vivid colors for durable graphics. FPG2 inks are ideal color reproduction such as photorealistic graphics.

Every VersaCAMM comes with VersaWorks, our own RIP software for professional print quality. VersaWorks features the Roland Color System to accurately reproduce the spot colors you select from Roland Color charts and swatch books. Variable Data Printing makes it easy to create a series of individualized prints based on one template, with each print featuring its own photos, messages, numbers and names. In addition, VersaWorks estimates the ink usage and print time for each graphic so you can accurately monitor your time and costs. You can also update your software automatically through the Internet.

Roland VersaCAMM VP-540i Printer/Cutter

Technical Specs & Details

*1 The length of printing or cutting is subject to the limitations of the program.
*2 Using Roland specified media, print travel of 1 m, temperature: 25°C (77°F), humidity: 50%RH
*3 Not assured when the print heater or dryer is used.
*4 Using Roland specified media, loaded on the shaft, [PREFEED] menu item must be set to "ENABLE," with 25 mm or more for both right and left margins and 35 mm or more front margin, excluding expansion or contraction of the media.
VP-540i: Media 610 mm wide or over and 4,000 mm long. Media 610 mm wide or less and 8,000 mm long. VP-300i: media 3,000 mm long.
*5 Provided that media length is under 3,000 mm. Temperature: 25°C (77°F) Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media.
*6 Using Roland specified media, data size: 1,000 mm in the media-feed direction, 1,346 mm (VP-540i) or 736 mm (VP-300i) in the carriage-movement direction. No lamination. Automatic detection of crop marks at 4 points when media is reloaded.
During cutting, [PREFEED] menu item must be set to "ENABLE." Temperature: 25°C (77°F) Excludes the influence of misalignment, expansion or contraction of the media.
*7 Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. The preset temperature may fail to be reached depending on the ambient temperature and media width.