Description

MIG-500CP is the welding power source for PULSE MIG, MAG and CO2 welding with IGBT inverter technology and is connected to mains both 220V and 380V by wiring connection change. Further, it features soft arc start, stable arc characteristics and precision control .

Standard Specification

• Mains : 220V/380V, 50/60Hz
  
  
• Output Current : 40 ~ 500A
  
  
• Input Wattage : 25KVA(18KW)
  
  
• Rated Load Voltage : 15-40V
  
• 
  No Load Voltage : 70V
  
  
• Crater Voltage : 15-40V
  
  
• Crater Current : 40-500A
  
  
• Wire Diameter : 1.2/1.6
  
  
• Duty Cycle : 500A 50% (Temp. 25'C)
  
  
• Outer Dimension : 320*600*500mm
  
  
• Weight : 48kg
  

Features

• 100% ARC START
  Maximizing start current instantly to acquire quick start and to solve the problem of burn back.
  
  
  
• LOW SPATTER
  Designed spatter reduction function in circuit diagram.
  Mains @ both 220V and 380V input by wiring connection change
  
  
• HIGH SPEED WELDING
  PWM (50,000/sec) can obtain high speed welding by soft and continuous arc.
  
  
• CRATER FUNCTION
  Prevent blowhole at start point and crater at finish point.
  
  
• PULSE FUNCTION
  For MIG welding, activate pulse function and adjust ideal frequency, base current and width for best performance. Available PULSE MAG as well.
  
  
• WAVE SHARP FUNCTION
  In CO2 welding, adjust the current, considering material & thickness of electrode, for spatter reduction and arc function.
  
  
• SOFT FUNCTION
  Spatter reduction circuit which is built-in will be activated.
  
  
• PURGE FUNCTION
  Check the gas supplying flow and clear Tip of the torch.