EN10219-2 Non - alloy / Fine Grain Steels Cold Formed Welded
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- China
- Brand name
- Torich
- Payment Terms
- L/C,T/T
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- welded steel pipe, fine grain steels, cold formed steel tube, welded structural hollow sections
- Category
- Steel Pipes
Torich International,.Ltd
China
- Verified Certificate
-
9
| Product name | EN10219-2 Non - alloy / Fine Grain Steels Cold Formed Welded | Certification | - |
|---|---|---|---|
| Category | Steel Pipes | Ingredients | - |
| Keyword | welded steel pipe , fine grain steels , cold formed steel tube , welded structural hollow sections | Unit Size | - |
| Brand name | Torich | Unit Weigh | - |
| origin | China | Stock | - |
| Supply type | - | HS code | - |
Product Information
EN10219-1 EN10219-2 Cold Formed Welded Structural Hollow Sections of Non-Alloy and Fine Grain Steels
Part 1: Technical delivery condition
Part 2: Tolerances, Dimensions and Sectional Properties
Structural hollow section manufacturing process:
Structural hollow sections are manufactured by electric weding or submerged arc welding without subsequent heat treatment. Hollow sections manufactured by a continuous process shall not inlude the welds used to join the lengths of strip prior to formning the hollow section, except that for hlically welded submerged arc-welded (SAW) hollow sections, such welds shall be permitted when tested in accordance with 9.4.3.0 EN10219-1, EN10291-2.
Delivery conditions:
The hollow sections are delivered cold formed without subsequent heat treatment except that weld seam maybe in the as welded or heat treated condition
NOTE: For SAW hollow sections above 508 mm outside diameter it may be necessary to perform a warm shaping operation, which does not affect the mechanical properties, in order to meet the out-of-roundness tolerance requirements.
Suitability for hot dip galvaninzation:
The products are sutibale for hot dip galvanization.
TABLE 1 Tolerances
Symbol | Unit | Definition |
B | mm | Nominal length of side of square hollow section.Nominal length of the shorter side of a rectangular hollow section |
C1/C2 | mm | Length of corner region of a square or retangular hollow section |
Dmax/Dmin | mm | The maximum and minimum outside diameter of a circular hollow section measured in the same plane |
H | mm | Nominal length of the longer side of a rectangular hollow section |
M | Kg/m | Mass per unit length |
T | mm | Nominal thickness |
O | % | Out-of-roundness |
T | mm | Nominal thickness |
V | mm | Total measured twist |
TABLE 2 Tolerances
Characteristic | Circular hollow sections | Square and rectangular hollow sections | |
Outside dimensions (D,B andH) | ±1% with a minimum of ±0.5mm and a maximum of ±10mm | Side length (mm) | Tolerance |
H,B ＜100
100≤H,B≤200 H,B＞200 | ±1% with a minimum of ±0.5mm ±0.8% ±0.6% | ||
Thickness(T) | For D≤406.4mm: T≤5mm ±10% T＞5mm ±0.50mm For D＞406.4mm: ±10% with a maximum of 2mm | T≤5mm ±10% T＞5mm ±0.50mm | |
Out-of-roundness(O) | 2% for hollow sections having a diameter to thickness ratio not exceeding 100① | —— | |
Concavity/convexity② | —— | Max. 0.8% with a minimum of 0.5mm | |
Squareness of side | —— | 90° ±1° | |
External corner profile | —— | See table 3 | |
Twist(V) | —— | 2mm plus 0.5mm/m length | |
Straightness | 0.20% of total length | 0.15% of total length | |
Mass(M) | ±6% on individual lengths | ||
①Where the diameter to thickness ratio exceeds 100 the tolerance on out-of-roundness shall be agreed.
②The tolerance on convexity and concavity is independent of the tolerance on outside dimensions.
TABLE 3 External Corner Profile
Thickness T mm | External Corner Profile C1,C2,or R1 mm |
T≤6 6＜T≤10 10＜T | 1.6T to 2.4T 2.0T to 3.0T 2.4T to 3.6T |
The sides need not be tangential to the corner arcs.
TABLE 4 Tolerances on length①
Type of length | Range in mm | Tolerance |
Random length | 4000 to 16000 with a range of 2000 per order item | 10% of sections supplied may be below the minimum for the ordered range but not less than 75% of the minimum of the range |
Approximate length | ≥4000 | ﹢50mm 0 |
Exact length | ＜6000 ≥6000 to ≤10000 ＞10000 | ﹢5mm 0 ﹢15mm 0 ﹢5mm +1mm/m 0 |
①The purchaser shall indicate in the enquiry and order the type of length required and the length range or length required.
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | L/C,T/T | Shipping time | Negotiable |
- President
- sales
- Address
- Room706,Qiling Mansion, Yinzhou District, Ningbo,China 315100
- Product Category
- Steel Pipes
- No. of Total Employees
- 101-500
- Company introduction
-
Torich Interational Co.,Ltd is a professional manufacturer and exporter of steel pipes materials. It is an international marketing and sales company specialized in steel tubes, which holds the factories of Seamless Steel Tubes with Carbon and Alloy Steel Grade, Welded Precision Steel Tubes，DOM Steel Tubes, Seamless & Welded Stainless Steel Tubes with Nickel and Alloy Steel Grade.
Our factory was established since 1997, with the name of Haiyan Sanxin Steel Pipe Co., Ltd. The factories’ technicians are of great engineering experience in steel pipe industry for more than 20 years, which are in great command of production technology for Cold Drawing and Cold Rolling. So we have strong technician team and manufacturing capability.
- Main Product
Related Products
one touch Rebar Coupler
steel pipe
High Fin Tube
PUP JOINT 4 ½“12.6 PPF EUE 8RD 4FT LONG L80
Stainless Steel Double Ring Press Joint SP-JOINT
