Product Description 

Features-- Magnetic Flow Meter for water 

1.No pressure loss, no moving parts.

2.High accuracy of 0.5%.

3.Wide size range of 10-3000mm, adapt to different size of pipeline.

4.Digital three-line LCD, able to display positive and negative instantaneous and accumulative flow.

5.Measurement is not affected by the density, viscosity, temperature, pressure and electroconductibility of fluid;

6.Multiple choices are available for the liner of converter and the material of electrode;

7.Pulse and 4-20mA standard current output. Multiple choices of communications: RS232, RS485, HART, Modbus, Profibus, etc.

8.Explosion-proof type can be used at relevant explosion-proof sites. IP68 remote type can be used underwater.

9.Variable forms for different kinds of working conditions.Compact and remote form; flanged, flanged wafer, clamped, threaded, insertion end connection; DC/AC, battery power supply.

Specification-- Magnetic Flow Meter for water 

Company Information

Company Information-- Magnetic Flow Meter Measuring Instruments

1.We have more than ten years in this field.

2.Our customer satification is 99.5%.

3.We are located in Kaifeng, the most ancient and biggest base of flow isntrument in China. which means we have full access to the most advanced technologies in this field.

4.We are award ISO9001:2008.

5.ISO and CE certification.

6.Our belief is "Accuracy and Attitude,Access to Customer".

7.Our monthly output of electromagnetic flow meter is 2000 pcs.

8.We are able to provide electromagnetic flow meter with international standards.

9.Our goal is to make world wide brand.

Our services

Selection of nominal diameter-- Magnetic Flow Meter for water

As magnetic flow meter has a high rangeability of 1500:1, the selection of nominal diameter is the same as that of process pipe;

If there are solid particle in the measured medium, a flow rate range of 1~3m/s is recommended. If the practical flow rate is excessive yet inconvenient to adjust, the nominal diameter of the instrument is better larger than that of the process pipe, under which condition the flow rate in the measuring pipe of the flowmeter can be properly decreased and the abrasion of electrode and liner caused by the particle can be alleviated;

If there are sediment in the process pipe, a flow rate range of 1~3m/s is recommended. If the practical flow rate is too little, the nominal diameter of the instrument is better smaller than that of the process pipe in order to properly increase the flow rate of the fluid in the flowmeter to avoid the effect on the accuracy caused by the sediment.
If the flow rate is too little yet a high-precision measurement is required, a sensor smaller than the nominal diameter can increase the flow rate to ensure high precision.

In the above conditions, a reducing pipe should be jointed to both the upstream and downstream of the flowmeter. The center taper angle should be no more than 150 and there should be a straight pipe at least 5 times of the the process pipe jointed to the reducing pipe.

Several tipsbefore you choose our instruments-- Magnetic Flow Meter for water

1.The measured fluid must be conductive.

2.The measured fluid must be full of the pipeline.

3.The medium temperature must be below 180°C.

Ordering Notes-- Magnetic Flow Meter for water

Please read our brochure carefully to know the product model and coding rules before ordering, then choose the right product(s) and relevant code according to practical requirement. For remote flowmeter, a special cable of 10 meters is provided along. If the spacing is greater than 10 meters, guests should order according to the practical spacing. If necessary, please note:

A: the parameters like upper limit value of flow range or the relevant flow rate that need to be set before the flowmeter ex-work;

B: whether there is a requirement of immersing usage;
C: whether there is a requirement of providing companion vice flange for installation;
D: please consult with us when you have any special needs.

Paking