Produt introduction

The SHD-20K Series(DIN Rail Type Surge Protector) electricity wells up the protector to use exchanging power supply systems and so on 50Hz/60Hz, 220V/380V

This product outer covering design installs on the 35mm guide rail, in sets at the expiration toward the release unit

when the protector superheat,the puncture expiration,expires the release unit to be able automatic to be separated

from it the electrical network,simultaneously the visible warning telltale becomes red by the green

The protection module may in have in the working voltage situation to replace

Uses the patent technology in fuse-less type /Protection circuit of Superheat

(Koera Patents, US Patent, Indonesia Patent)

Feature

♠ Built-in integrated thermal runaway protection device (patent)

♠ Confirmation possible whether or not protection ability loss

♠ Standard operating range suitable for VAC

♠Supervise dry type contact / connection of remote monitoring

Application

♠AC cabinet panel, incoming pannel / switchboard

♠Electric equipment

♠AC/DC power supply

♠Stripe connector

♠UPS

♠Inverter

Specification

♠ Rated Voltage : AC110 / 220 / 380

♠ Operating Frequency ; 50Hz / 60Hz

♠ Protection Class : IP20

♠ Mounting Base : DIN rail 35mm

♠ Housing Mtr'l : Nylon W6

♠ Max. discharge current : 40KA ( Imax 8/20micro/sec ) IEC 61643-1

♠ Nominal discharge current : 20KA ( In 8/20micro/sec)

♠ Clamping current for 10KA ( 8/2micro/sec ) surge current : 1200V

♠ Standard : IEC61643-1, IEC61643-12,  IEEE C62.41, UL1449