This apparatus is a water/form spouting fire engine equipped with 1-stage high pressure centrifugal turbine type fire pump and 10,000 liters of a water tank.

MODEL : STD16U2W10K

ORIGIN : KOREA / 2014 UP DATED

Technical specification

1. DIMENSIONS

   a. Overall length : Approx.      9,600mm

           width :              2,495mm

           height : Approx.      3,400mm

   b. Wheel base :          4,500+1300mm

   c. Ground clearance :            270mm

   d. Turning radius :             9,100mm

   e. Gross vehicle weight :Approx.  25,000kg

2. CHASSIS

   a. Model:     K7CEF(Euro2)

b. Maker :    TATA-DAEWOO MOTOR CO.

c. Drive:      6×4

3. ENGINE

   a. Diesel engine

b. Model : DE12TIS ( DOOSAN INFRACORE)

   c. Type : Direct injection Turbo charger intercooler, 4 stroke-cycle, water-cooled, 6 cylinders, Cyclonic dry paper element

d. Max. Power : 340 ps / 2,100 rpm

   e. Max. Torque : 145 kg-m / 1,260 rpm

   f. Displacement : 11,051cc

4. TRANSMISSION

   a. Type : Manual

   b. 6 Forward / 1 Reverse

   c. Model : T15S6

5. POWER TAKE OFF

a. Full power clutch P.T.O

b. Pneumatic driving mode by means of the electric solenoid valve.

   (Manual converting system is available for emergency.

c. Water cooled

6. CLUTCH

a. Hydraulic control with Air pressure assistance

b. Dry single plate with diaphragm

c. Out side diameter : 430mm

7. STEERING

   a. Left hand drive(LHD)

   b. 2-Spoke, Ball-nut type, Tilt & Telescopic steering column  

c. Hydraulic power assisted

8. SUSPENSION

   a. Front : Semi-elliptic , parobolic leaf springs with shackle link (Taper leaf spring)  

b. Rear : Semi-elliptic , laminated leaf springs with shackle link (Multi leaf spring)

   c. Shock obsorber : Hydraulic double acting telescopic type

9. WHEEL & TIRES

   a. Wheel : disc type

   b. Tire : Front  12R22.5 -16PR(Single)

          Rear  12R22.5- 16PR(Double)

10. BRAKE SYSTEM

   a. Service brake : Full air, dual circuit fixed S cam with spring loaded chambers

   b. Parking brake : Spring loaded type chambers on the rear wheels

   c. Exhaust brake : Air operated, butterfly valve type

11. ELECTRIC SYSTEM

   a. Electric alternator : Alternating DC24V - 80A

   b. Battery : DC24V (12V-150Ah×2, DUAL BATTERY)

   c. One(1) Red LED Beacon bar 1,800mm  on the cab roof

   d. Four(4) Red LED Beacon Lamp  on the body structure outside wall

   e. Election Motor Siren

   f. Four(4) function electric city address system and speaker

   g. Circuit break main switch for battery

   h. Two(2) Xenon Search light for working

   i. Pump Cabinet Light

   j. Tool Cabinet Light

   k. Head lamps

l. Front and rear combination lamps

   m. License plate lamp

n. Back-up lamp, Back-up Buzzer

o. View monitor at same time for rearward  gear change

p. Inverter or converter for radio communication system

12. CABIN

   a. Type : Double cab  with 4 door

   b. crew : 1+1+3(5)

   c. Air-con system and heater

   d. Radio

   e.Speedometer with odometer / Air & Oil Pressure / Voltage/ Tachometer / Fuel / Water temperature gauges

   f. Pneumatic system and adjustable driver seat

   g. Back view side mirrors

   h. Hydraulic tilting system

13. FUEL TANK & ACCESSORIES

   a. Fuel tank capacity : 400 liters

   b. Hydraulic Jack and lever

   c. OVM tool kit

   d. Spare tire

FIRE FIGHTING STRUCTURE

14. WATER TANK

   a. Capacity : 10,000Liter

   b. Material : Stainless steel(STS304)

   c. Thickness :  3mm/4mm

   d. Swash partition : Installed at each left and right inside tank.

             (To reinforce the driving performance of the vehicle.)

   e. Tank mounting : Connecting the tank to the main frame with bolt.

f. Accessories : Level gauge

15. WATER TANK CONNECTION

   a. Manhole : diameter 450mm / STS304, 2ea

          Easy to fill water in the tank and you can get in the tank inside

          to do the maintenance work.

   b. Overflow : diameter 75mm

   c. Water filler : diameter 63mm(NST coupling)

 Valve/piping is available to fill water in the tank from the hydrant.

   d. Water tank supply :  diameter 63 mm

             Valve/piping is available to get the water in the pump back to the water tank.

   e. Pump suction (Water tank discharge):diameter 125 mm(butterfly v/v)

             Valve/piping is available to get the water in the pump back to the water tank.

16. BODY SPECIFICATION

a. Structure material : mild steel (SS400 or EGI) and AL check plate

b. All the leveling parts for such as step, running board, etc. are made of check plate to prevent from being slipped.

c. Holder(bracket) and compartments are made to attach many different types of the fire equipment so that the equipment will not be taken away while driving and will be easy to be removed.

d. Hand rail : Stainless steel pipe 25mm

e. Ladder : Attached rear side of the vehicle.

f. Hose storage : A storage is installed to load the hose at bellow the discharge valve

g. Tool cabinet are equipped .

h. Pump room

17. FIRE PUMP

a. Model / Maker: NY5300( A-0) / Namyoung Co., Ltd.

b. Type : centrifugal type (1-stage)

c. PTO driving mode

d. Capacity : discharge - 4,000 L/min at 10.5kg/cm²

                 not less then 2,500 L/min at 14kg/cm²

max. pressure - 20kg/cm²

e. Material : main drive shaft - stainless steel

                   impeller / guide vane - bronze

18. PUMP CONNECTIONS

a. Water suction from pond to pump

              size 100mm  each (1) on boss side

   b. Water suction filling hose connection

              size  65mm each (1) on boss side

   c. Water discharge from fire pump

              size  65mm each (2) on boss side

   d. Connection type : NST coupling

19. PUMP OPERATING CONTROLS

a. Operator position : Quick and easy to operate at both side as positioned in the rear of the vehicle. Aluminum nameplate is available for all indications. Illuminating light is available.

b. Operating lamp for water pump/priming. pump is available.

c. Water tank level gauge : Installed at the pump operating panel.

                             Illuminating light is available.

                             (to check the tank's water level at night.)

d. Priming pump(Vacuum pump) : Eccentric vane type

                                  capacity 660mmHg

                 not less then seven(7) meters from pump level

                 material - bronze

e. Engine throttle lever : Engine throttle controller is available.(Manual type)

f. Cooling valve : To cool down the engine and P.T.O inside by using water inside the pump while operating the pump.

g. Vacuum pump oil tank(4 liters)

20. GAUGE

a. Compound gauge : diameter - 107mm

                          material - stainless steel 304

                          pressure - 0-20kg/cm²

                          vacuum - 0-760mmHg

                         oil gauge type

b. Pressure gauge(discharge) : diameter - 107mm

                                material - stainless steel 304

                                pressure - 0-35kg/cm²

                                oil gauge type

21. WATER MONITOR

a. Model / Maker : SL-23AB/ Silla Fire Co., Ltd.

b.Size : inlet 3” flanged, outlet 65mm male threads

b. Type : manual handle operation

c. Driving range : vertical - 20°+75°, horizontal 360°

d. Material : bronze

e. Fixed type monitor with ball valve

f. Flow rate: 2000 LPM at 14 Bar

g. Shooting range :  Water 60m horizontal

                 Foam 50m horizontal

22. Paint and Finish

a. The apparatus body, chassis cab exterior and the firefighting truck device will be a polyurethane painting system. 

b. The body finish sanded and prepared for final paint. Upon completion of final preparation, the body painted utilizing the highest quality, polyurethane base paint with Fire Red color.

c. Finish paint applied in multiple coats to ensure proper paint coverage with a high gloss finish.

* ACCESSORIES

1. Four(4) suction hose 100mm × 2.5m (NST coupling)

2. One(1) Strainer for suction hose

3. One(1) Play pipe Water nozzle 65mm with tip

4. One(1) Stream/Fog Water nozzle 65mm

5. Two(2) Multi-purpose nozzle with hand grip 65mm

6. Two(2) Multi-purpose nozzle with hand grip 38mm

7. One(1) Coupling  FM65×FM65

8. One(1) Coupling  M65×M65

9. One(1) Coupling  FM38×3865

10. One(1) Coupling  M38×M38

11. One(1) Reducer  FM65×M38

12. One(1) Y-Coupling  FM65×M38-2

13. Six(6) Delivery hose 65mm×15m

14. Six(6) Delivery hose 38mm×15m

15. Two(2) Spanner for delivery hose

16. Two(2) Spanner for suction hose

17. Two(2) Powder Extinguisher(ABC) 3.5 Kg

18. One(1) Hand Lantern(6v Dry Cell)   

All specifications described in this leaflet are subject to change without notice.