Superior quality/Inorganic/non-toxic materials

CeraCrete

Fast Set High Strength Ceramic Cement for Concrete Repair

DESCRIPTION
CeraCrete is a single component concrete material that sets up in approximately 30 minutes and is ready for vehicular traffic in 90 minutes. It bonds strongly to most concrete, tile, masonry and asphalt surfaces. It can be used equally well indoors or outdoors in a variety of applications and develops high early strength enabling quick turnaround in demanding environments.
 

RECOMMENDED USES

BENEFITS/FEATURES

SURFACE PREPARATION
Repair surfaces must be free of oil, grease, wax, efflorescence, debris and other surface contaminants. Insure a clean and sound surface. Chip down the repair area to a minimum depth of 1/2". For best results, edges may need to be saw cut to create a vertical edge depth of at least 1/2", do not feather edge. Remove all freestanding water prior to placement. CeraCrete may be placed over dry or damp surfaces.
 

MIXING INSTRUCTIONS 

Well mixing is key technique for increasing bonding strength

Mix CeraCrete with 13% water by total weight thoroughly for 3 minutes using a mortar mixer or an electric drill and paddle. The material will appear dry at first but will "wet out" as it is further mixed. Only mix enough material to be placed within 15 minutes (working time will decrease at higher temperatures).
 

For instance, 2 lbs of road repair +Total 4.16 oz water

Water ratio:

*Road rfepair: Without gravel, 13% by total weight  With the gravel, 9% by total weight.

*Thin set for tile: 21% of total weight.

*Grout for tile: 30% total weight.

APPLICATION.
Immediately after mixing, place the CeraCrete slurry into the repair area.

COLD WEATHER APPLICATION
For cold weather applications the mix water should be pre-heated along with the substrate surface. Cover the repair area after setting to maintain the temperature.

At the under 14 F⁰(-10 C⁰), discuss with supplier/manufacturer

COVERAGE
CeraCrete is packaged in 50 LB. (22.5 Kg) bags yielding approximately 0.35 ft³ (10 Liters) after mixing with water. For deeper repairs using a gravel extender the yield is approximately 0.7 ft³ (20 Liters). Can be mix CeraCrete 50 LB with another 50% of 3/8” gravel.
 

CLEAN UP
Clean all tools and equipment with soap and water immediately after use.
 

SHELF LIFE
12 month from date of manufacture in the original unopened bag/plastic bucket container. Unused material should be kept in a closed bag or plastic bucket container and protected from moisture and other contaminants.

SPECIFICATIONS

See each technical data of each product

WARRANTY:CERAKO warrants its products to be free of manufacturing defects for 12 months from the date of purchase, if the products are used according to CEARKO’s instructions prior to their expiration date. CERAKO will replace the defective products.

Such product replacement shall constitute the sole and exclusive remedy for any claim under this warranty. This warranty is in lieu of all other warranties, expressed or implied. Cerako makes no warranty of merchantability or suitability of its products for any particular purpose. CERAKO disclaims all liability for incidental, consequential or indirect damages or losses of any kind arising out of the use of these products.

MSDS: Contact manufacture. cerako@hotmail.com

Manufacture: CEARKO Inc.

Address: Yangpyeong Kun, Yangseomyun, Mokwang Ri. 269-1,  Kyeonggi Do, Korea.

Phone: 82-31-772-4596.  Fax: 82-31-772-4594

Business call: Land line: 82-(0)2-3216-9683. Fax: 82-(0)2-3216-9685.

            Mobile:82-(0)10-8778-4596

E-mail: cerako@hotmail.com