A. Mixer

 Introduction
- the design of the driving parts at the bottom head minimizes any inconvenience that may ensue by having it placed at the top head.
- An automatic air valve is employed for the drain valve.
- Two kinds of heating method—steam and water—are applicable
- Temperature can be set to be automatically controlled.
- The impeller should basically be of a disk type, and this dispersion mixer can be used for the
  production of carbopol pre-gel.

Spec 
1. Material : STS304+SS400
2. Capacity
    150Kg / Batch (Motor : 15Kw)
    200Kg / Batch (Motor : 19Kw)

B. Vacuum Plodder

 Introduction
- This apparatus plays the most important role in a soap production line.
- Improvement of a hard soap’s quality depends on pressurizing, crushing, and grinding methods.
- The ingredients of a hard soap are softened by the mesh of the punching plate in the damper
  into good-quality pellets


Spec
1. Material : STS304+SS400
2. Deformation : Vacuum Degassing

C. Molding Machine

Introduction
- This soap molding machine is the most critical part of the production line.
- It is composed of a stamper, a conveyor, a chip conveyor, and a chip return conveyor

 

Spec 
1. Capacity
    120Ea/Min(20gr -40gr per Soap)
    100Ea/Min(50gr-100gr per Soap)
    80 a/Min.(120gr-140gr per Soap)
2. Speed Control : By V.S. Motor
3. Conveyor
    Material : PVC
    Belt width : 200mm