Yessform System


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
South Korea
Brand name
Yessform
Payment Terms
Negotiable
Production method
Negotiable
Shipping / Lead Time
Negotiable / Negotiable
Keyword
insulator, passive house, concrete forms, insulated concrete forms
Category
Home & Kitchen , Other Machinery & Industry Equipment , Molds , Heat Insulation Materials

YESSFORM

Membership
VIP
Country / Year Established
South Korea South Korea / 2013
Business type
Manufacturer
Verified Certificate

11

DUNS

Product name Yessform System Certification -
Category Home & Kitchen
Other Machinery & Industry Equipment
Molds
Heat Insulation Materials
Ingredients -
Keyword insulator , passive house , concrete forms , insulated concrete forms Unit Size -
Brand name Yessform Unit Weigh -
origin South Korea Stock -
Supply type - HS code -

Product Information

http://blog.naver.com/yess888/220463288010
http://blog.naver.com/yess888/220090931685

Yessform

│Introduction│

Cool summer. Warm in winter. Quiet indoor environment. Reduction of heating and cooling cost!
Interlayer noise solution "yessfoam system"
"yessform” guarantees Insulation of building genuine quality

Use of Product
Die combined use of insulating finishing material
Size
Small : 660 x1404,  Large : 660 x 1654
Material
Foamy polystyrene (Compressed styrofoam)
Invented By
Kang Chang-gyu
Patent Name
Die framework and its use to install mold dies

│Comparison│

The existing dies
Heavy steel products of euros. In-cornor
Using out-corner,
High cost of labor and transportation
Excessive construction period
Causing genuine temporary material’s cut and damaged
After the progress of work, attach separate insulation
Yessform Dies
With Lightweight-compressed steyrofoam material
Being able to personnel and equipment fee,
Shorten a loss of materials costs Separate insulation attached is not required
Die combined use of insulating finishing material

│System│

Classification
Item
Condensation
Corner foam
After installing the outer corner upright 
Do the connective installation of yess foam, and Before the installation of yess foam, pre-install corner foam on the based corner, then connect yess foam to combine them.
* Material: Compressed foam
Yess foam
The joint where H-BAR is inserted is concave, and Fixing with yess pin after H-BAR’s insertion, This structure with the combination will have its stability and precision bonding.
* Material: Compressed foam
H - BAR
Yess foam connected to each other, and assembled, then, yess pin Fixes them.  
* Material: Plastic
Yess Tie
Its role is to grab the both form. Fixing H-BAR to keep the inner-space between Yess-Forms, and to support their horizontality Hooks can be combined.
* Material: flat tie
Corner Bar
After connecting and installing internal right angle of Yess-Form, fix them with Yess-Pin
* Material: Plastic
Yess Ring
Insert to Yess-Tie. Installing to be hooked at of Tie, the internal space of the Yess-Form is kept
* Material: Plastic
Yess Pin
H. Bar, Corner Bar connect to the Yess-Form each other to fix them,
* Material: Plastic

│Construal Height of Floor│

Yess Form’s height is completed with its 2 sheets installed

 Height of Floor
Classification
Inner Wall
Outer Wall
3,058 mm
2nd level
1,404
1,654
1st level
1,404
1,404
Over all
2,808
3,058
3,308 mm
2nd level
1,404
1,654
1st level
1,654
1,654
Over all
3,058
3,308

│Specifications & Patents│

Type
Dimensions
Material
Patent No.
Patent type
YESS
Form
Small: 50 x 660 x 1404
Large: 50 x 660 x 1654
Compressed Styrofoam
No. 10-1250860
2012.3.0637463.0
■ Registered as a patent in Korea
■ Registered as a design patent in China
Corner
Form
Small: 660 x 1404
Large: 660 x 1654
Compressed Styrofoam
2013-0047485
■ Applied for the design patent in Korea
H-Bar
For crossing: 50 x 100
For left and right connection: 100 x 100
Plastic
201230655461
2012.3.0655461.4
■ Applied for the patent in Korea
■ Registered as a design patent in China
Corner
Bar
For crossing : 50 x 100
For left and right connection: 100 x 100
Plastic
201230655245
■ Applied for the patent in Korea
■ Registered as a design patent in China
YESS Tie
180 mm (2.3 x 18mm)
Metal
20230655430
2012.3.0637401.X
■ Applied for the patent in Korea
■ Registered as a design patent in China
YESS Ring
30 x 20
Plastic
2013-0047493
■ Applied for the patent in Korea

│YESS Form construction on the upper slab│

Issues of the conventional construction method

  • Fixes plywood (12mm) on wood with nails for concrete casting on floor plate.
    Puts insulation and dustproof Styrofoam on plywood, cast concrete, and then removes wood and plywood.
  • Inconsistency with the total array size of the floor plate causes the cut-off of a scrap of plywood - excess loss of material and labor costs
  • Transportation, installation, and removal of plywood – excessive cost of transportation

Advantages of YESS Form System

  • In the state of zero energy loss, the system casts concrete. Therefore, it improves around 15% intensity of cast concrete in winter (cold season) compared to  the conventional method.
  • The system does not require plywood, instead, assemblies YESS form on wood along with H-BAR, Corner Bar, Plastic connection pins. After that, it casts concrete. Therefore, it does not require installation and removal of plywood.
    : Greatly shortening of construction period, and reduction in labor and material costs.

Use of YESS Form and wood (not use plywood)

│Fair Comparision│

│Constructive Competitiveness│

  • Features - cost savings

  • Wall insulation and die construction costs (Horizontal. Vertical 2,400 MM)


    Excellent performance! Reference to imagine more satisfactory !

B2B Trade

Price (FOB) Negotiable transportation -
MOQ Negotiable Leadtime Negotiable
Payment Options Negotiable Shipping time Negotiable

YESSFORM

Country / Year Established
South Korea South Korea / 2013
Membership
VIP
Business type
Manufacturer

11

DUNS

President
Chang Gyu Kang
Address
710 Sangmun-ri, Munsan-eup, Jinju-si, Gyeongsangnam-do, Korea
Product Category
Home & Kitchen,Molds
Year Established
2013
No. of Total Employees
1-50
Company introduction

Dear customers,

Yessform has developed, manufactured and distributed Yessform which is light styrofoam insulated finishing material for mold in construction. We locate in Jinjoo, Kyungnam, Korea.

Through our technology and construction career and knowhow our technology and construction method have been recognized not only in Korea but in the world and we acquired patent right for Yessform.

Yessform can be used as mold as well as insulated finishing material, so no construction, installation and disassembly of mold are required.

As it is used by assembly type of work, it is light and convenient, and high insulation effect is available by its optimized sealing.

As it is compressed styrofoam, accident risk is quite low.

 

Providing comfortable room environment by eliminating noise between floors and from outside in complex building!

 

Main Product

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My TK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more