Drying & Setting Oven
Model : YKFM/DS001

│Features│

It is designed to operate both fan motor and cooling fan after firing the burner, stop and convey the tow from climper when the temperature of setting machine increases around 160˚C~180˚C. To carry out the regular works, it is necessary ro set the temperature to 90˚C and to reduce the blast of cooling fan to half.

This blast fan with high performance used to thermally bind the climped product shall make the bulky performance and drying performance more excellent while improving the quality of products. Also, it is stain punching chamber system, so toe isn`t squeezed in between the side opening. The oil is saved, as hot-air blower is installed in the bottom.

│specification│

• Capacity : 1200kg/H
• Motor
  VS Motor 5HP x 1EA, 5HP x 6P x 4EA
  10HP x 6P x 2EA,25HP x 4P x 1EA
• Reduction M/C 5HP : 200 : 1
• Buner : GPM25 x 1/4HP
• Thermally : 400,000kcal x Hour x 1EA
• Width of Tow : 200mm
• Water Content : 5%
• Silicone Content : Silicone / Fiber = 1ton / 80ton
• Heating Temp : 170˚C Silicone
• Retention time : 40minute