Feature

• High stable system
  • System supply up to minimum 1.8 V low voltage Ram and is operated at marginal level of maximum and minimum.
  • Data exchange with PC is speedy and stable through RS232 communication.
  • Prevent device damage with confirmation of insert and contact status.
  • Protect device from ESD(Electrostatic discharge) due to circuit protection of board.

• High efficiency
  • All type of device such as DIP/PLCC/SOIC etc packaged in tube are available.
  • Simple and easy exchange of tool is able to change model.
  • High work efficiency resulted in simultaneous supply and discharge .
  • Supply 10 tubes of device and discharge with 5 tubes.
  • Provide statistic function on work result .
  • Quantity of annex equipments is reduced according to builtin of erasing and labeling function
  • Minimum size, lightest and maximum efficiency in same level of products are assured.
  • Enable to operate on control panel and confirm on LCD.
• High reliability
  • Best qualified components are built in . (SMC / ORIENTAL MOTOR /ELNEC etc)
  • Guarantee 0 % of programming error according to development with ELNEC , European programming specialist company.
  • Highest programming speed is guaranteed due to best programming environment.

Specification

• Physical/ Environmental Specifications
  • Vertical / Gravity Type
  • Angle : 30
  • Size : 19 in(W) * 36 in(L) * 33.8 in(H)
  • 480mm(W) * 920mm(L) * 865mm(H)
  • Weight :70kg
  • Air Requirements : 5~6kgf / sec
  • Power : AC100~240V 50/60Hz
  • Color : Light Lvory(EX8816(S))
  • changeable depend on customer's requirements
  • Tube Dimensions for Loader / Unloader
    • Length : 200mm~620mm
    • Width : 8mm~38mm
    • Height : 5mm~20mm
  • Temperature : 5~40 C
  • Humidity : 30~80%

• Packages Supported
  • DIP 300 mil 8~24 Pins
  • DIP 600 mil 24~48 Pins
  • PLCC 28~84 Pins
  • SOIC 150 mil 8~16 Pins
  • SOIC 300 mil 16~32 Pins
• Device Supported
  • EPROM / EEPROM / FLASH EPROM
  • SERIAL E(E)PROM / PROM /NV RAM / PLD
  • Microcontrollers
• Programmer/Control
  • Universal Type
  • Standard 48 PIN ZIF Socket
  • Micom Control
  • Interface : RS232 Port
• Capacity
  • Productivity : 700 / HR
  • Tube Loader : 10 Sticks
  • Tube Unloader : 5 Sticks
    
• PC Requirements
  • DOS3.2 or Higher / Windows 3.0 or Higer
  • Pentium 100 MHZ, 32 MB free RAM
  • HDD with Minimum 10 MB free space
  • Port : Parallel / Serial

Supported device

• EPROM : NMOS/CMOS, 1702*, 2708*, 27xxx and 27Cxxx series, with 8/16 bit data width, full support for LV series
• EEPROM : NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width
• Flash EPROM : 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, from 256Kbit to 32Mbit, with 8/16 bit data width, full support for LV series
• Serial E(E)PROM : 17Cxxx, 24Cxxx, 24Fxxx, 25Cxxx, 59Cxxx, 85xxx, 93Cxxx, NVM3060, MDAxxx series, full support for LV series
• PROM : Harris, National, Philips, Signetics, Tesla, TI
• NV RAM : Dallas DSxxx, SGS/Inmos MKxxx, SIMTEK STKxxx, XICOR 2 xxx, ZMD U63x series
• PLD, CPLD series: Altera, Atmel, AMD-Vantis, Lattice, NS, Philips, TI, ...
• Microcontrollers 48 series : 87x41, 87x42, 87x48, 87x49, 87x50 series
• Microcontrollers 51 series : 87xx, 87Cxxx, 87LVxx, 89Cxxx, 89Sxxx, 89LVxxx, all manufacturers, Philips 87C748..752 series
• Microcontrollers Intel 196 series : 87C196 KB/KC/KD/KT/KR/...
• Microcontrollers Atmel AVR : AT90Sxxxx, ATtiny series
• Microcontrollers Microchip PICmicro : PIC12Cxxx, PIC16C5x, PIC16Cxxx, PIC17Cxxx, PIC18Cxxx series
• Microcontrollers Motorola : 68HC11 series
• Microcontrollers National : COP8xxx series
• Microcontrollers NEC : uPD78Pxxx series
• Microcontrollers SGS-Thomson : ST6xx series
• Microcontrollers TI : MSP430 series
• Microcontrollers ZILOG : Z86xxx series
• I.C. Tester
  • TTL type: 54, 74 S/LS/ALS/H/HC/HCT series
  • CMOS type: 4000, 4500 series
  • Static RAM: 6116 .. 624000
  • User definable test pattern generation
• Support device/ Packages
  • DIP, PLCC, SDIP, SOIC, PSOP, TSOP
  • PLCC28, PLCC32 , PLCC44 type : support by option adapter