What is DIY Mat Cable?

The Mat Cable is floor heating system which is developed to make installation easy for a consumer.
It does not require any special tools and it is quickly fixed to a clean subfloor using the attached adhesive tape strips. The easy installation makes it an ideal
"Do it yourself" or Trade kit without any requirements or experience needed for planning their layouts. Its uncomplicated concept is specifically designed for the professional user.

The electric heating Cable is attached to a tough fiber glass mesh, rolled out before tiling and connected to a programmable thermostat. It is suitable for in tile-adhesive, thin set or in-screed floor heating applications directly beneath the tile, stone, floating and timber floor finishes, suitable sub-floors include concrete slabs, F/C sheet floors or existing tile.

Features of Cable on the Mat

It is a specialized Heating Cable that can be installed easily by a consumer after purchasing. Inner thickness of the heating cable is 5.5mm. It has a cutting edge floor heating system coated primarily by Ni-Cr resistance wire and silicone with temperature resistance of 270°C current wire inserted and then coated with PVC. It is used easily and can be constructed at a place with a lot of moisture, time finishes and veranda. It also has minimized height of Cold lead that can be used easily with 1cm additional plastering.

Structure of DIY MAT CABLE

Specification of DIY MAT CABLE

Installation Procedure

1. Clean and completely remove dirt on the floor. (Concrete with insulation polystyrene)	2. Facing the cold lead up out of the mat and with the cable placed on the mat, lay the product on the floor.	3. When you change the direction after spreading the cable, cut only the mat instead of cutting the cable.
4. When you want to change the direction of the mat, turn only the mat to the direction to be installed with letting the cable as it is and then lay it on your desired floor.	5. Check if the correct resistance and current run using the tester after layou.	6. Plug in the thermostat. (Connect power) IN : Connect to the outlet plugging. OUT : Connect to the cable. (Pay attention to the insulation and dampproofing)
7. Bind the wet temperature sensor to the cable.	8. After installing the product on the floor, spread cement or tile adhesive along the surface and let it dry out.	9. Flooring