1.The series are consisting of screen box, screen seat, electronic motors bracket, damping spring, vibration exciter and motor.

2.WAY series vibrating equipment are ideal choice in many industries such as mine, metallurgy, chemical industry, electric power, etc.

3.Basing on the working situation, the motor can be installed in the left side or right side. According to the install locations of the motor and exciting machine, vibrating screen can be divided the upper vibrating and bottom vibrating types.

4.We can design and manufacture different types of vibrating screen according to customers’ requirements.

Working principle of vibrating screen

1.The two same vibrating motors which rotate synchronously in different directions, making the screen body do periodical to-and –fro linear moving to achieve screen classification purpose.

2.The crossbeam and side boards of screen are made of stainless steel plate or heat-resisting plate and connected by the rivets to decrease internal stress and make good fastness. 

Installation and debugging of vibrating screen

1. Before installation, test constractly field base and installation drawing.primary and secondary

vibration deducation springs are both vertical, motor axis is lower 3 to 5 mm than vibrator 

axis and then weld strongly support rack of motor and spring base.

2. Require rotating direction of two motors must be opposite.The unload running time of screen is 

4 to 6 hours, screen should run stably,no yaw and strange noise and test  whether  screen plate 

and exciter are strong.

3. Inspect working temperature of vibration bearing, which should be less than 75 centigrade

degree.

In order to meet the international market, we comply with the following standards when production.

1.JB/T4042-1999

2.JB/T6388-2004

3.JB/T5994-1992

4.GB985

5.GB986 

6.Q/ZB74 

 design drawing of Outline