-. Specifications

Measurement Range
1 – 20,000 mg/actual m3
Scale Ranges
Dual ranging, user selectable anywhere within the measurement range.
Detection Limit 0.5 mg/Am3
Stability
Zero and Span Drift
Short Term (2Hr.) – Less than 1% full scale Long
Term (24Hr.) – Less than 2% full scale
Response Time Approximately 3 seconds
Calibration
Internal system automatically performs a low level (Zero) and upscale Span cycle at intervals initiated by internal clock or by external data system command (contact closure). External calibration tube provides traceable values for reference calibrations and instrument audits.
Ambient Temperature -30°C to 55°C
Process Gas Temperature
To + 260°C standard, to + 375°C with high
Temperature probe option.
Process Gas Pressure
To + 130mm H2O standard
To + 375mm H2O w/High Volume Purge
Blower Option.
Process Gas Velocity Instrument operation is
Independent of gas velocity.
Power Requirements
110° ± 15Volts AC, 60Hz, 6A
(220V, 50Hz optional)
Output
4-20MA, 550 ohms maximum resistance.

-. Installation Information

PIPE Size:
Mounts into standard 4” (or larger) pipes
Mounting Flange
ASA standard 4”(150#) flange (9”OD, with eight, 3/4” diameter bolt holes on 7 1/2” diameter B.C.)
Probe Length
Distance from mounting flange to center of sampling volume – 18”, 36” or 60” standard
Physical Dimensions
Probe length plus 30 1/2” long x 12 1/2” wide x 18” high
Weight 125 – 140 pounds

-. Optional Equipment

1. High Pressure Purge System
   For process gas pressures in excess of + 130mm H2O
2. High Temperature Probe Option
   For temperatures from 260 C up to 375°C maximum
3. Output Cable
   Complete with connector, lengths to 500 feet.
4. Plant Air Backup

WARRANTY Twelve (12) month return-to-factory warranty.
Specifications subject to change without notice