Aromatic Polyurea for Multi Protection Coating
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- protection coating
- Category
- Waterproofing Materials
Atek Fine Chemical
South Korea
- Verified Certificate
-
16
| Product name | Aromatic Polyurea for Multi Protection Coating | Certification | - |
|---|---|---|---|
| Category | Waterproofing Materials | Ingredients | - |
| Keyword | protection coating | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | Stock | - | |
| Supply type | - | HS code | - |
Product Information
POLYTOP 200HB
Polyurea Joint Sealant
Description
POLYTOP 200HB is two liquids high temperature and pressure spray coating paints with its main ingredients combined of Urethane and of urea. Its reaction is very fast with its high speed hardening, and its cut is formed in a few seconds, which is hard modified polyurea with high property of matter such as impact, wear-resistance, tensile strength, coefficient of expansion, water-proofing, low-temperature resistance, chemical resistivity, adhesion.
Use
- For water-proofing and protection coating of concrete structure.(exposure, nonexposure, flooded area)
- Floor coating such as of industrial facility, plant, parking lot, general warehouse.
- Water-proofing coating of all kinds of wastewater treatment plant and water-tank flooded area.
- Repair and reinforcement water-proofing coating of concrete building or structure.
Features
- It is high speed hard modified polyurea product.
- High tensile strength and Extension rate.
- Excellent water-proofing and anti-corrosion.
- Solves the sheet connection defect.
- It is environmental and healthily safe.
- It is applied in various basal planes.
- It is built even in winter.
- Spray equipment at the rate of 1:1.
- You can order the color from the basic color.
Technical data(wet properties)
|
Appearance
|
liquid
|
|
Specific gravity(25°C)
|
"A" 1.12±0.1
"B" 1.02±0.1 |
|
Viscosity(cps)
|
"A" 600~1000
"B" 600~1000 |
|
Thermal stability
|
0°C to 50°C
|
|
Shelf life(10-40°C)
(Unopened containers) |
6months
|
(Processing peroperties)
|
Gel time
|
0-5 sec
|
|
Tack free time
|
0-10sec
|
|
Recoat
|
0-10hr
|
(Dry properties)
|
Tensile strength ASTM D412
|
2300±200psi
|
|
Elongation
|
400±50%
|
|
Hardness(Shore)
|
90±5(A)
45±5(D) |
|
Tear strength
|
65±5N/mm
|
|
Abrasion resistance
(1kg, 1000rev) |
58mg(CS-17)
|
|
Impact resistance(Thickness 1mm)
|
Above 1.5kg.m
|
(Chemical resistance)
|
10%-Sulforic acid
|
Not change
|
|
30%-Sodiumcloride
|
Not change
|
|
30%-Sodiumhydroxide
|
Not change
|
|
50%-Sodiumhydroxide
|
Not change
|
|
Diesel
|
Not change
|
|
Salt water resistance
|
Not change
|
Application
- Mix ratio 1:1, It must use spraying equipment for polyurea. And keep the pressure minimum 2000psi with heating to 65-75°C.(Pre heater temperature should be approx at 70-75°C and hose temperature should be at 65-75°C). These include GRACO, SPI company product . And Gun models include GRACO, SPI company product for polyurea spraying.
- Component "B" must be mixed each day, while to spray.
- Thinning is not required.
- You check the "SSPC" before start spraying.
Caution
- Store in warm place preventing from freezing.
Contents should not be exposed for a long time. - In case of contact with skin and eyes, flush immediately with plenty of water and seek medical advice.
- For further information, see the Material Safety Data Sheet
Packing
- POLYTOP 200HB "A" is available in 200L steel drums and "B" is in 200L steel drums.
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
- President
- LEE, Hong-Sik
- Address
- 32-21, Wonnamsandan 1-gil, Wonnam-myeon, Eumseong-gun, Chungcheongbuk-do, Korea
- Product Category
- Coating & Paint,Concrete,Industrial Supplies
- Year Established
- 2008
- No. of Total Employees
- 1-50
- Company introduction
-
<p>Dear Sir. Ma'am
ATEKFC is a company that not only has revitalized the domestic market for concrete admixtures for construction as well as for polyurea, but also has exported them oversea through know-how that made by having had a long experience, and experts with professional talent. The effords to develop high quality concrete admixtures have been recoanized, and now our products such as a shotcrete accelerator are being exported to the U.S., Canada, Russia and many others.1. Polyurea (POLYTOP : Brand name)
We are producing various kinds of polyurea (two components) , not only by spray type but also by brush type and water soluable polyurea (one component)2.Set accelerator for shotcrete (AF-2000 / AF-3000/2000ㄶ/2500SG/2000L)
We also produce mainly accelerator for shotcrete for tunnel and mine.
We are doing well not only in Korean market as well as overseas market now.3.Admixture for concrete
We are produce speciall admixtures (Cement hydreation control agent for shotcrete system and other concrete)Please feel free to contact us whenever you have any question.
Many thanks.
HS Lee
- Main Markets
-
Australia
Hong Kong(China)
Russia
Thailand
Viet Nam
- Factory Information
-
20
- Main Product
