PE-Rt Pipe
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- Category
- Other Plastic Raw Materials
Dongshin Ind. Co., Ltd.
- Country / Year Established
-
South Korea
/
- Business type
- Others
- Verified Certificate
-
16
| Product name | PE-Rt Pipe | Certification | - |
|---|---|---|---|
| Category | Other Plastic Raw Materials | Ingredients | - |
| Keyword | - | Unit Size | - |
| Brand name | - | Unit Weigh | - |
| origin | Stock | - | |
| Supply type | - | HS code | - |
Product Information
Pipe
PE-Rt Pipe
|
PE-Rt Name
|
Outer Diameter (mm)
|
Inner Diameter (mm)
|
Thickness
|
Length
|
|
12mm
|
16mm
|
12.0
|
2.0
|
100m
|
|
15mm
|
20mm
|
16.0
|
1.9
|
100m
|
|
20mm
|
25mm
|
20.4
|
2.3
|
100m
|
PE-Rt pipe whose physical property and execution characteristic is excellent is being used as an apartment complex heating, water supply piping purpose and the one for China export can be produced, packed up to 300m at maximum 1R depending on order.
Mortar floor heating execution method of the Dongshin PE-Rt pipe
- Floor zone insulation water-proof mat treatment
Lay the insulation water-proof mat on the floor to be executed and conduct mortar execution. Execute up to the partial position of the 5cm above of the wall body to get moisture-proof of the surrounding wall body too. - Basic mortar execution for pipe support
As mortar floor zone is the floor for support when executes the pipe, mortar mixture ratio to make the sand versus cement 3:1 extent and make the floor face horizontal and completely cure. - Circulation warm water distributor installation
Install the warm water distributor horizontally, and make the space between valve socket and floor maintain over 30 cm space. Position of the warm water distributor is to install that make the supply valve come from the front and make the recovery valve come from the rear.
Once attach the air vent to the distributor, heat efficiency becomes higher since get rid of the air inside the each room's piping pipe then facilitate harmonious warm water circulation. - Bending method of the pipe piping
All we have to do is to grab the pipe by both hands as long as possible and bend slowly toward the desired angle without forced circulation or heating of the warm water. In order not to be broken off when bends the pipe, should grab over minimum both hands distance as long as possible, and diameter should be the over minimum bending diameter when bent. - Pipe fixation method and finish treatment
For pipe fixation drive a nail on the basic mortar floor in use of the saddle and make it fix. At this time fixation interval should be 1m extent, and for the bending zone install the saddle at 2 places on the 90 degree bending spot, install the saddle at over 3 places on the 180 degree spot. When piping on the light-weighted air bladder, may fix by U-shaped pin.
If use the cream bar, get installed evenly and immediate installation is possible after the floor mortar was cured. Execute the finish mortar on the fixed pipe not to make the pipe expose, and conduct finish treatment making the floor uniform.
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Jeong-soo Shin
- Address
- 698-2 Yeonban-ri, Seokgok-myeon, Goseong-gun, Jeollanam-do, Korea
- Product Category
- Other Plastic Raw Materials
- No. of Total Employees
- 101-500
- Company introduction
-
Dongshin Industrial Co., Ltd. has been engaged in continual research & development to improve technology of the water-tightness and pressure-proof of the heating piping facility material, PE-Xa(X-L) pipe ever since established its business in May 1995 and now produces a highest quality product KS Standard to offer a smooth supply of the PE-Xa(X-L) pipe of high quality to the large-scaled apartment complex construction site and regional demand place after completed automatic production facility extension.
Produces a highly efficient small electric boiler, electric heat accumulation pipe that jointly researched and developed with university institute to help prepare against exhaustion of the energy resources and sky-rocketed crude oil price era and subsequently applied for its utility model with patent to the Korean Intellectual Property Office and engages in both overseas export and domestic sales. Besides, opened a site corporate branch with direct managing shop in Chingtao, China and used to hold a heating execution seminar inviting the site buyers to secure and promote Chinese domestic market aside from 50 plus business partners in China.
We will develop into a leading enterprise on the heating material for the house heating, horticulture, adding the production articles such as electric home boiler, plastic connection parts, light-weighted warm-water floor panel, PE-RT pipe etc along with company CI and product design development, so that put every endeavors to be a firm rewarding to all those customers who have rendered a patronage so far.
- Main Product
Related Products
MASTER BATCH
PE EVA Foam
_2.jpg "Biodegradable dishes_PLA__1")
Biodegradable dishes(PLA)
LDPE Film Scraps
_2.jpg "Anti_microbial Master batch_bioplastic raw materials__1")
Anti-microbial master batch (Bioplastic raw materials)
