Curvic Coupling, Hirth Coupling
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- Category
- Other Machinery Parts
DLC Co.,Ltd
- Country / Year Established
- South Korea /
- Business type
- Others
- Verified Certificate
-
16
Product name | Curvic Coupling, Hirth Coupling | Certification | - |
---|---|---|---|
Category | Other Machinery Parts | Ingredients | - |
Keyword | - | Unit Size | - |
Brand name | - | Unit Weigh | - |
origin | Stock | - | |
Supply type | - | HS code | - |
Product Information
CURVIC COUPLING
CURVIC COUPLING Is Product Description
Curvic Coupling Use for Turret of CNC Lathe
Machining Center, Robot, Gas Turbine, Airplane, etc
| Feature
Accurate and precise centering
The curvature of the teeth give these couplings their very own and unique self-centering feature. One member is ground with the outside edge of the cup type grinding wheel to form a concave-shaped tooth. The mating member is ground with the inside edge thus producing a convex-shaped tooth. Both halves of the couping are ground to ensure that they mesh at the center ot the teeth. The coupling has the advantages of accurate alignment and precision centering when-ever they are in mesh.
High indexing accuracy of ±2 sec of arc.
This very high accuracy is achived by the prease self centering centering feature of the wide spread tooth contecting uniformly over all the teeth.
High wear resistance
High grade case hardened steels are used to manufacture the couplings. The teeth are first cut, hardened to HRC 60 and then accuretely ground. This gives a high level of durability to the precision tooth profile which means that the coupling retains its high accuracy characteristic over a long period of use.
| Teeth Viewed at the Outside Diameter
| Shape of Tooth
2PCC | |
3PCC | |
| Product a classified list
Assortment | Type | Outside, Number of Tooth , a Use |
|
2 P C C |
M |
- Outside: ø30~ø40 - Tooth : 20~24 |
|
S | - Outside: ø100~ø600 - Tooth : 20~720 General Type CURVIC COUPLING. Machining Center of Index Table Stability Accuracy importance NC LATHE Turret, Pallet Changer a use. Small precision instrument is applied in field TURRET CHANGER - Type NO : Number of Tooth-Outside Dia - Inside Dia |
||
S | - Outside: ø700~ø1000 - Tooth : 72~720 Large size Type CURVIC COUPLING. Large size Machining Center or Machine On division position decision use. Have a many of set exchanges and is not many in case use on side - Type NO : Number of Tooth-Outside Dia - Inside Dia |
||
W | - Outside: ø160~ø280 - Tooth : 24~60 Another Form Type CURVIC COUPLING. Inside Dia can enlarge and CLAMP CYLINDER diame-ter enlarge can. A Large size TURRET a use. - Type NO : Number of Tooth-Outside Dia - Inside Dia-max Outside Dia |
||
S | - Outside: ø100~ø600 - Tooth : 20~720 Input angle 15 That have being special teeth CURVIC COUPLING 30 more Occasion Iimiting in Clamp power or use to detailed clutch that deliver rotatonal motion - Type NO : Number of Tooth-Outside Dia - Inside Dia |
||
3 P C C |
T | - Outside: ø110~ø820 - Tooth : 24~720 3PIECE CURVIC COUPLING. When rotate is used in case roate WORK of heavy without rising.SET ex change is principle and compatibility is less than 2PCC - Type NO : Number of Tooth-Outside Dia - Inside Dia |
High precision measurement
Long term quality assurance is provided by a secure quality control of entire products
| Quality control procedures
ITEM | Accuracy | Super Accuracy | NOTE | |
Tooth Contact |
At the number of teeth (B.N) |
More than 80% | More than 90% | Tooth mating state is brougnt into contact with the standard master curvic coupling. The standard teeth contact length should be above 50% of teeth length. Throughout the whole teeth, two adjacent teeth should not be disconnected. More than 80% if teeth surface should contact evenly. |
At the face width (B.W) |
More than 50% | More than 50% | ||
Tooth coupling |
Run out on top face | 0.02 | 0.01 | The run out is checked by light mating with master curvic coupling |
Run out at outside diameter |
0.02 | 0.01 | ||
Indexing Accuracy | 5" | 3" | 4-Division accumulate maximum error | |
Coupling Thickness |
±0.10 | ±0.05 | The combined thickness of mated convex and concave teeth is marked as in the standard dimension table. |
| High precision measurement
| Comparison chart between angle accuracy a linear tolerance
Curvic Coupling
Because it can receive enough hardness and big clamp force at Machining Center of Index Table. High Torque Is suitable by power transmission purpose Curvic Coupling's Allowable load differs according to size. Allowable Cutting Load, Allowable Torque, and Force Clamp is calculated and decided according to it's usage
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Park Sang Bay
- Address
- 732-11, Ancheong-dong,, Gwangsangu, Gwangju, Korea
- Product Category
- Other Machinery & Industry Equipment
- No. of Total Employees
- 1-50
- Company introduction
-
We thank for all customers who encourages and shows interest in DLC Co., Ltd.
Our company is a specialized manufacturer of Curvic coupling product and a leader of technology prevailing various relevant devices.We are also proud of being the largest supplier in domestic and international market with this product. Also we put a ceasless effort and frontier spirit into R&D while we listen to customers demand as for the reqeust on the standard quality. We are also ISO9001:2008 certified.
We, DLC Co., Ltd. will support you to grow together throughout stable quality, right time delivery, and reasonable price.
Thank you.
- Main Markets
-
China
India
Japan
- Factory Information
-
DLC.CO.LTD
- Main Product
Related Products
FAG NTN NSK KBC bearings
JS-2EJ4
FR Coating
Vagcom 17.1.3 ATMEGA162 VCDS 17.1.3 China crack VAG 17.13 Fo
Electric ULV Sprayer ATOMER 2