## SPECIAL DESIGNED DOT PRINTING GLOVES & MC.

1. PVC DOT PRINTING FOR THE PU PALM COATING GLOVES;

1) PRODUCTION THE PU DOT PRINTING GLOVES.

-GOOD QUALITY DOT PRINTING GLOVES.

-ACTUALLY, DOT PRINTING MOULD CAN COVER BY 5 KINDS OF PLAT TYPE MOULDS WITHOUT REGARDS TO GLOVE

SIZE AS DIFFERENT 7 KINDS LINERS.

2) PRODUCTION CAPACITY OF DOT PRINTING GLOVES; 20-25 PAIRS/MINUTE

3) THIS DOT PRINTING EQUIPMENT CAN PRODUCE ONLY PVC DOT GLOVES AS UNDER THE REASON.

(1) It is recommended to use PRE-MIXED PVC solution as the material for PVC DOT PRINTING.

(2) Process of PVC DOT PRINTING.

-First, do PVC DOT PRINTING on the EMPTY LINER. PVC resin dries quickly.

- Execute NBR coating or PU coating on the rapidly dried PVC DOT PRINTING part.

-And peel off the coating part using water spray.

-Then take it out after going through the drying process.

4) For PVC DOT PRING material, chemical manufacturing company supplies PRI-MIXED material. Of course, according to the request of the customer, color pigment of the desired color is also added and supplied. In DOT PRINTING company, printing can be done easily by adding a little THICKENER according to the type and environment of the liner.

5) DIMENSION OF EQUIPMENT (L*W*H); 3.53 * 0.95 * 1.35

6) WE WOULD LIKE TO ADVICE THAT THE WHITE COLOR COATING GLOVES MAY ARISE DISCOLORATION AFTER SOME MONTH LATER AS EMBOSSING PRESS DO HIGH TEMPERATURE.

7) Recently, most customers prefer NBR DOT PRINTING GLOVES because PVC and other additives used for dot printing contain some carcinogenic ingredients that are not good for health.

8) And CHEMICALS for PVC DOT PRINTING are designated as dangerous goods and cannot be transported by air.

2. NBR DOT PRINTING FOR THE NBR OR PU PALM COATING GLOVES;

1) SHOWING THE PATCH GLOVE TO THE BUYER.

2) ACTUALLY, DOT PRINTING MOULD CAN COVER BY 5 KINDS OF PLAT TYPE MOULDS WITHOUT REGARDS TO GLOVE

SIZE AS DIFFERENT 7 KINDS LINERS.

3) THIS DOT PRINTING EQUIPMENT CAN PRODUCE NBR OR PVC DOT GLOVES AS UNDER THE REASON.

(1) It is recommended to use PRE-MIXED NBR RESIN OR PVC RESIN.

(2) Process of NBR DOT PRINTING.

-First, do NBR or PU COATING ON THE LINERS. NBR resin dries very slowly. It is need complete drying by drying chamber.

- Execute DOT PRINTING on the Nbr or Pu coating part.

-And do complete drying again by drying chamber.

-Then take it out after going through the drying process.

4) For Nbr dot PRING material, chemical manufacturing company supplies PRE-MIXED material. Of course, according to the request of the customer, color pigment of the desired color is also added and supplied. In DOT PRINTING company, printing can be done easily by adding a little THICKENER according to the type and environment of the liner.

5) MACHINE DIMENSION(L * W * H); 25 * 1.3 * 3 meters

6) THIS PATCHED GLOVES ARE MADE BY SILK PRINTING BETWEEN THE THUMB AND(FOREFINGER) INDEX FINGER. AND PATCHED THICKNESS AND WIDTH CAN REGULATE OWING TO PURPOSE OF USING.

7) CAPACITY; 15-20 pairs./minute

8) FULL CYCLE TIME; 60 minute

9) DRYING TEMPERATURE ; 40- 60 ℃

10) LINER INSERT; MANUALLY

11) GLOVES PATCH MOULD HAS SPECIAL FUNCTION AND MECHANISM FOR FREE DISTANCE REGULATION BETWEEN THE THUMB AND FOREFINGER.

12) PATCH MOULDS CONSISTED OF PLAT TYPE AND MOULD DESIGN IS MADE BY THE THUMB AND INDEX FINGER(FOREFINGER) ONLY.

13) WATER LEACHING TANK IS NOT NEED FOR EXCLUSIVE PRODUCING NBR DOTTING. BUT DRYING CHAMBER AND LEACHING TANK INCLUDING WATER SPRAY UNIT FOR PVC DOT PRINTING AND DRYING THE GLOVES ARE NEED.

14) DRYING TIME; AROUND 50-55 seconds per pair.

15) And this type Dot printing machine was designed for Patch printing

♣And this type of dot printing machine is designed to also print patch if the mold and some jigs are changed.

■Features of a machine that can perform both Patch printing and Dot printing

1) This machine produces Nitrile Patch printing and Nitrile Dot printing simultaneously.

2) Additionally, if the customer desires, this machine can perform both Nitrile Patch printing and PVC Dot printing without any changes to the device.

-However, in the case of PVC resin, it has recently been recognized worldwide as a variety of cancer-causing substances or substances harmful to the human body, so most products produced using PVC resin are gradually being replaced with Nitrile resin.

-To do dot printing with PVC resin, prepare a formula by mixing 5-6 types of additives. Several substances contained in stabilizers have been shown to be very harmful to the human body.

3) With this newly designed printing machine, all you have to do is insert liners from both sides of the machine or remove gloves that have been coated and dried.

▣. SPECIAL DESIGNED HORIZONTAL RUNNING TYPE NITRILE NBR PATCH & DOT PRINTING MACHINE FOR REINFORCEMENT BETWEEN THE THUMB AND FOREFINGER. THIS MACHINE IS DESIGNED TO PERFORM NITRILE PATCH PRINTING & DOT PRINTING SIMULTANEOUSLY.

1. CHAIN MOVEMENT MOTOR.

1) DWBM135 MOTOR

2) Driving gear unit

2. CHAIN LENGTH; 86.3 meters × 2 SIDE

-Chain length (#2082); 172.6 meters

-Rail quantity; 62 ea

3. MOULD BAR PITCH;203.2 mm

4. SPROCKETS AND SHAFT

-Sprocket;16 ea / Shaft; 8 ea / Unit bearing; 16 ea

5. PATCH & DOT PRINTING PROCESS.

1) Designed with the latest technology, this type of PATCH and DOT printing machine produces PATCH gloves and DOT gloves simultaneously in a continuous line.

- And this type of PATCH & DOT printing machine has a mechanism similar to a horizontal dipping machine that moves according to the movement of the chain.

2) The composition of the combined PATCH & DOT printing machine is as follows.

(1) On the right; 4 pcs PATCH moulds can be printed simultaneously.

(2) On the left; 2 pcs of DOT moulds can be printed simultaneously.

3) In other words, the printing process is carried out simultaneously on the four(4) PATCH moulds on the right and the two (2) DOT moulds on the left. Therefore, 4 pcs of PATCH printing gloves and 2 pcs of DOT printing gloves are produced at one time.

-Therefore, takeout is performed in both directions for PATCH gloves and DOT gloves that have finished printing.

-Naturally, PATCH & DOT printing jobs are created automatically by two printing units on both sides. Automatic PATCH & DOT printing devices print in both directions simultaneously.

4) As soon as the PATCH coated gloves are taken out, the PATCH mould stays in place. And for the thumb and index finger, the liner will fit snugly into the PATCH mould.

And as soon as the liner is fitted to attach the thick Nitrile resin, the WOKER must manually widen the gap between the thumb and forefinger.

-The reinforced PATCH mould has special functions and mechanisms for free adjustment of the distance between the thumb and forefinger.

5) In the case of DOT printing, two DOT gloves are produced at one time.

The operator pulls out the DOT gloves that have completed the drying process and simultaneously inserts the liners into the mould. The DOT mould is a fixed type, so all you have to do is insert the liners naturally.

6. PATCH MOULD & PATCH MOULD BAR & METALLIC SCREEN

1) Patch mould ; 424 pairs (848 pcs)

2) Patch mould bar; 424 bars

-1 Patch mould bar; 2 pcs moulds (Right; 2 pcs)

3) 1 metallic screen plate; consisted of 4 Patch printing patterns

-Output; 1 metallic screen plate---2 printing patterns Χ 2 mould bars=4 patch print/1 cycle

(1) Generally, the sizes of coating gloves are classified into 7 types. However, the NBR Patch glove mould can patch print all 7 types of gloves with 5 types of moulds regardless of glove size.

(2) Approx. output capacity; 480 pairs/hr

(3) Customers must change the patch pattern, thickness, and width depending on the purpose of use, and produce a new metallic screen if desired.

7. DOT MOULD & DOT BAR & SILK SCREEN PLATE

1) Dot mould ; 212 pairs (424 pcs)

2) Dot mould bar; 424 bars

-1 Dot mould bar; 1 pc moulds (LEFT; 1 pc)

3) 1 Silk screen plate; consisted of 2 Dot printing patterns

-Output; 1 silk screens plate---1 printing patterns Χ 2 mould bars=2 patch print/1 cycle

(1) In general, coated gloves are classified into seven sizes. However, NBR Dot printing moulds are available in 5 types regardless of glove size, and DOT printing is possible for all 7 types of gloves.

(2) Approx. output capacity; 240 pairs/hour

(3) Customers must change the DOT pattern, thickness, and width depending on the purpose of use, and if desired, produce a new silk screen plate.

8. DRYING CHAMBER FOR HARDING THE PATCH & DOT PRINTING GLOVES.

- DRYING CHAMBERS & HOT AIR FEEDING UNIT BY ELECTRIC HEATING SYSTEM.

- HEATED AIR FEEDING & CIRCULATION SYSTEM INCLUDING FIN TYPE HEATERS.

- HOT AIR SPREADING SYSTEM WITH SMALL HOLES ON THE STEEL SHEETS.

- HOT AIR FEEDING DUCTS.

- ONE DRYING CHAMBER IS ALSO HEATING BY ELECTRIC FIN HEATERS AND THEN HEATED HOT AIR FEED INTO DRYING CHAMBER BY A FAN. AND HOT AIR SPREAD ON THE PATCH COATED GLOVE BY MANY SMALL HOLES WITH THE PLAIN SHAPE.

- DRYING TEMPERATURE ; 40- 80 ℃

- DRYING TIME; DRYING TIME AND TEMPERATURE MAY CHANGE ACCORDING TO THE SITE SITUATION.

- FIN TYPE HEATER CAPACITY; 78 kw (THIS IS DESIGNED POWER. ACTUAL POWER DECREASE WHEN NORMAL RUNNING THE FIN HEATERS.

- HOT AIR BLOWER; 7.5 hp

9. PATCH & DOT PRINTING DEVICE.

1) PATCH PRINTING HEAD-------------1 set (RIGHT)

2) PATCH PRINTING SCREEN-----------1 set (Additional PATCH printing tray for exchange---------4 sets)

3) DOT PRINTING HEAD----------------1 set (LEFT)

4) DOT PRINTING SCREEN-----------  1 set (Additional DOT printing tray for exchange------------4 sets)

♣ Nitrile PATCH resin allows the Nitrile material that accumulates on both sides of the print tray during printing to easily harden over time. Additionally, Nitrile resin may continue to accumulate on the inner edges of the PATCH pattern. Depending on the printing condition and the condition of the printing tray (metallic screen), it is recommended to replace it with a new one from time to time.

♣ Also, in silk screens for DOT printing, small patterns may become blocked by nitrile resin over time. In this case, replace with a new silk screen to make the DOT pattern clear and clean.

10. INSULATION GLASS WOOL PANEL.

-FOR HEATING ROOM;75T-------------140 HV

11. REINFORCEMENT PATCH & DOT PRINTING MATERIAL.

(1) NBR RESIN + SOME SPECIAL ADDITIVES

(2) ADDITIVES ARE VERY IMPORTANT MATERIALS FOR MAINTAING THE GLOVES SPECIAL FUNCTION.

-THE INFLUENCING POWER FOR INCREASING A VISCOSITY.

-PREVENTION OF FAST HARDENING FOR USING LONG LIFE SPAN.

-KEEPING SOFT SITUATION OF THE PATCH & DOT PRINTING PARTS.

12. MIXER FOR NITRILE RESIN AND ADDITIVES------------1 set

13. PORTABLE MATERIAL SUB-TANK------------------------2 sets

14. MACHINE CONTROL SYSTEM

-PLC SYSTEM AND TOUCH MONITOR

15. INSTALLATION, COMMISSIONING AND TRAINING

- 15 DAY × 2 SPECIALISTS

16. PACKING AND INLAND TRUCKAGE; 40 ft HQ (2 sets)

17. CONNECTED TOTAL POWER ;Approx. 95-100 kws