High altitude low pressure simulation test chamber
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- China
- Brand name
- grandetop
- Payment Terms
- L/C,T/T
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- temperature humidity test chamber, temperature cycle test chamber, altitude chamber for sale, high altitude low pressure simulation test chamber supplier
- Category
- Testing Equipment
Grande Electronics Technology Limited
- Verified Certificate
-
6
| Product name | High altitude low pressure simulation test chamber | Certification | - |
|---|---|---|---|
| Category | Testing Equipment | Ingredients | - |
| Keyword | temperature humidity test chamber , temperature cycle test chamber , altitude chamber for sale , high altitude low pressure simulation test chamber supplier | Unit Size | - |
| Brand name | grandetop | Unit Weigh | - |
| origin | China | Stock | - |
| Supply type | - | HS code | - |
Product Information
High altitude low pressure simulation test chamber
Altitude Chamber For Sale
Altitude Test Chambers
Temperature testing at altitudes up to 100,000 feet.
Grande can provide custom-built chambers for simultaneous testing of temperature and low-pressure altitude conditions. Two common applications are:
Testing of avionics or other aerospace equipment to simulate actual conditions it might experience.
Simulation of high-altitude conditions like might be found in mountainous regions.
NOTE: Altitude test chambers are custom systems, and differing requirements may significantly change the cost and utility requirements. Please let Grande know as much detail as possible about your anticipated testing specification/method, and we can provide you with a tailored system for your requirements.
Features
Temperature range from -70 to 200°C
Altitude range from ground to 100,000 feet
Optional humidity control when altitude system is off
Chamber interior size specified by customer
Automatic altitude control, integrated with temperature controller—No manual setting of altitude level!
Vacuum pump sized for climb/dive rate required by application
Viewing window and cable ports available
Corresponding Standard of the Temperature and Humidity Test Chamber:
1.GB10590-89 Low-temperature and low atmospheric pressure testing condition
2.GB10591-89 High-temperature and low atmospheric pressure testing condition
3. GB11159-89 low atmospheric pressure technical condition
4. GB/T2423.25-1992 Low-temperature and low atmospheric pressure test chamber
5. GB/T2423.26-1992 High-temperature and low atmospheric pressure test chamber
6.GJB150.2-86 High-temperature and low atmospheric pressure(Altitude) test
7,IEC60068-2-1.1990 Testing methods of Low-temperature test chambers
8,IEC60068-2-2.1974 Testing methods of High-temperature test chambers
9,IEC-540
10,ASTM D2436
11,JIS K7212
12,DIN 50011
13,BS2648
14,Mil-Std 202G (conditions 105C, A/B/C/F)
15,Mil-Std 810G (condition 500.5)
16,IEC 60068-2-39
17,IEC 60068-2-40
18,RTCA/DO-160F
19,JIS W 0812
Technical parameters:
Model No GATC-150 GATC-225 GATC-408 GATC-800 GATC-1000
Working room(L) 150 225 408 800 1000
Inner chamber size(mm)W*H*D 500*600*500 500*750*600 600*850*800 1000*1000*800 1000*1000*1000
Exterior chamber size(mm)W*H*D 1000*1600*1400 1000*1750*1500 1100*1850*1700 1500*2000*1700 1850*1600*2250
Packaging volume(CBM) 3 3.5 4.5 5.5 6
G.W.(KGs) 320 350 400 600 700
Testing temperature range -80°C,-73°C,-60°C, -40°C, -20°C, 0°C~+150°C, +200°C (300°C)
Performance Temperature range -65℃～150℃
Temp.fluctuation ±0.5℃（Room pressure）
Temp.accuracy ±2.0℃（Room pressure）
Heating up time ≤60min（+20℃～+150℃、RP、No-Load）
Cooling down time ≤45min(RP) ≤60min(RP) ≤90min(RP)
Pressure range RP～0.5kPa
Pressure control tolerance ±0.1kPa(≤2kPa)，±5%(2kPa～40kPa)，±2kPa(≥40kPa)
Depressurization time ≤20min ≤25min ≤30min ≤45min ≤50min
Working environment Temp：+5℃～+35℃；Humidity：≤90%RH；Airpressure：86-106kPa
Material Exterior chamber materia Stainless steel plate+ powder coated
Inner chamber materia SUS#304 stainless steel plate
Insulation Material PU Fiberglass wool
System Air circulation system Cooling fan
Heating System SUS#304 stainless steel high-speed heater
Humidification system Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser
Dehumidification system ADP critical dew point cooling/dehumidifying method
Controlling system TEMI880，990
Power kw 8 10 12 15 20
Water supply Water temperature:≤30℃;water pressure:0.2～0.4MPa;flow rate:≥10T/h
Other components Specimen holders 2pcs,electrical wire 1pc(3M),pressure testing port.
Safety protection device Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp.
Power supply AC 3Ψ380V 60/50Hz
Customized service Welcome to Non-standard,Specail requirements,OEM/ODM orders.
Optional accessories
1,Low Humidity and Dehumidifying sytstem.
2,Inner glass door with manual operating ports.
3,Temp./Humi.Recorder.
4,Pure water treatment device
5,RS-485 interface can be linked to Personal computer(PC) and achieve multi-level control & recording software management.
6,Liquid nitrogen(LN2)/Liquid Carbon Dioxide(LCO2) fast cooling-down system.
B2B Trade
| Price (FOB) | Negotiable | transportation | - |
|---|---|---|---|
| MOQ | Negotiable | Leadtime | Negotiable |
| Payment Options | L/C,T/T | Shipping time | Negotiable |
- President
- Ben Zhao
- Address
- www.grandetop.com
- Product Category
- Environment Project,Gas Disposal
- Year Established
- 2012
- No. of Total Employees
- 51-100
- Company introduction
-
<p>Grande Electronics Technology Limited is professional R&D,manufacture,sales service,maintenance,after-sales service, manufacturer of environmental test chamber. We established our own factory in 2012 , which has become an important manufacturer of environmentally friendly test chambers.To help our customers improving the testing requirements,Grande has established strategic cooperative partnership with first-class Universities, whose Cryogenics and Test Centers possess the world's leading and domestic first-class inspection techniques, cryogenics inspection equipment and instruments.As an enterprise responsible for society, environment and safety, the company has initially built ISO9001:2000 Quality Management System, ISO14001:2004 Environmental Management System and GB/T28001-2001 Occupation; Health Safety Management System in their industries. Besides, it adheres to the operation principle of "The best quality environmental test chamber manufacturer in China.Quality is not just a word".
- Main Markets
-
Armenia
Austria
Bahrain
Bosnia-Herzegov
Brunei
China
India
Iran
Kazakhstan
Kuwait
- Main Product
Related Products
AIS3000 compact
Hi-Fix Board
_2.jpg "Cable and Wire harness tester _MHT_610 _ 705__1")
Cable and Wire harness tester (MHT-610 / 705)
MB STAR DAS+WIS+EPC+XENTRY 03/2012
_2.jpg "Common Rail Injector Test Equipment _V310EX__1")
Common Rail Injector Test Bench (V310EX)
