Principle: Under vacuum or inert gas protection, the slowly rotating feed stock rod is heated by high frequency induction coil and melted inductively and continuously in the absence of crucible. Then the molten falls free, flows into atomization system and is crushed into a large number of small liquid droplets by high pressure inert gas from atomizer spray plate. Then small liquid droplets are solidified into spherical granular powders in flight. Feed stock doesn’t contact with crucible and fluid limiting diversion tube, so it doesn’t get pollution.System components: steel working platform, melting device module, vacuum equipment, inert gas atomization module, atomization tower, powder collection system, highly active powder material surface passivation treatment device module, control system 

  2.Specifications 

Total power: 100kW

Melting capacity: 5kg or 10kg (calculated by the density of Ti)

Feeding methods: single or continuous feeding by 10pcs each time.

Feeding speed: rotation rate 1~30r/min;

Feeding quantities:

    slow: 1~50mm/min (adjustable); fast: 200mm/min (constant).

Powder size: D50=45μm

Recovery rate: ≥ 95%

Gas consumption: high pure Ar or nitrogen max. 80Nm³/h

3.Features

1. It can produce titanium and alloyed powders with ultra-purity and spherical morphology by the raw material in form of rod. And it also can be applicable to produce high-melting- point and other active metal powders;

2. It can produce powder materials of highly chemical purity;

3. Low energy consumption; 

4. Anti-static and anti-explosion design.

Our efforts have always been focused on reducing purchase cost and minimizing investment risk for customers in industries of MIM (metal injection molding), acuum heat treatment, powder metallurgy, atomization powder manufacturing,carbon and silicon carbide materials, as well as amorphous materials, photovoltaic materials and Li-ion battery materials, etc. 

Re: Contact us and let us know your requirements of equipment. Then we will send these requirements to our technical department. So we will know whether our factory can offer you equipment or not.

2. Does your company customize equipment for customer?

Re: Yes, we can customize equipment according to customers' requirements.

3. Are you a trade company or a factory?

Re: We are a manufacturer with a huge factory. Warmly welcome to visit our factory and contact with us.

4. How can I believe your quality?

Our equipment are eqquiped with mechanical parts of world renowned brands like Schneider, Omron and so on, and also approved ISO9001 certification.

SEND US AN INQUIRY NOW !