Introduction

 Performance condition of building member, vertical resistance force division members, horizontal non-resistance force division members, and test of fire door for construction.

It is a test facility for measuring the fire performance of building members exposed to standard fire conditions. The fire prevention test facility is to fill the general requirement of fire test method of building members, performance condition of horizontal resistance force division members, performance conditions of horizontal non-resistance division members and fire prevention test method of building fire door. 

 

▣ ISO 834-1 : Fire-resistance tests -Elements of building construction

Part 1 - General requirements

▣ ISO 834-4 : Fire-resistance tests -Elements of building construction

Part 4 - Specific requirements for load bearing vertical separating elements

▣ ISO 834-5 : Fire-resistance tests -Elements of building construction

Part 5 - Specific requirements for load bearing horizontal separating elements

▣ ISO 834-6 : Fire-resistance tests -Elements of building construction  Part 6 - Specific requirements for beams

▣ ISO 834-7 : Fire-resistance tests -Elements of building construction  Part 7 - Specific requirements for columns

▣ ISO 834-9 : Fire-resistance tests -Elements of building construction  Part 9 - Specific requirements for non-load bearing ceiling elements

▣ KS F 2275-1 Methods of fire resistance test for elements of building construction-General requirements

▣ KS F 2268-1 Fire resistance test for door assemblies

▣ Other standards: BS 476(20-23), BS EN 1363(1-2), BS EN 1364(1), BS EN 1365(1), BS EN 1366(1-3),

BS EN 1634-1, ASTM E 119, ASTM E 814, UL 10(B-C), UL 263, UL 1709, UL 10(B-C), UL 1479, UL 2079, ISO 3008, ISO 3009  

 

▣ Vertical / horizontal / small heating test

① Test body and Refractories

Inside Dimension: 4,000 (W) x 3,000 (D) x 1,100 (H)

② Pattern & PID Control System

③ HMI & Control System

④ Additional Facilities

Test frame (1 each for land, ship, load test)

Hydraulic Unit & Cylinder Test Chamber and Stand

▣ Combustion Gases (Option Parts)

① I.D FAN

② Exhaust Duct

③ Emission Adjustment Damper

Stack Material: Carbon Steel

Excluding test furnace front upper gas collection unit (Hood) 

 

▣ Apply the temperature (ISO Curve) of the constant heat source inside the fire door to measure the degree of torsion (displacement meter) and

It observes the breakdown phenomenon by the heat source and additionally measures the heat flow rate to the outside of the fire door.

▣ Pressure measurement (Pa) and graph output distributed in furnace during test time

▣ Temperature measurement (oC) and graph output distributed in furnace during test time

▣ It is possible to record the characteristic and damage level of specimen during test time.