STANDARD:IEC 60840 AS/NZS1429.2 VDE 0276-632

VOLTAGE:up to 110kV

CAPACITY:2000km/month

good electrical, mechanical and thermal characteristics

excellent moisture, chemical and weather resistant

low dielectric factor than PVC insulation and better dielectric constant

constant performance at a long temperature range

long service span

LV:IEC60502-1 ,VDE 0276-603, ICEA S-95-658 ,AS/NZS 5000.1

MV:IEC60502-2 ,VDE 0276-620 ,AS/NZS1429.1 ,ICEA S93-639 ,ICEA S94-649

HV:IEC 60840 ,AS/NZS1429.2 ,VDE 0276-632

Conductor

Copper or aluminum, round, multiwire stranded and compact

Inner semi-conducting layer

Semi-conducting compound, cross-linked,

Insulation

Cross-linked polyethylene (XLPE), compound type

Outer semi-conducting layer

Semi-conducting compound, cross-linked,

Concentricity of conductor

The difference between the maximum and minimum value of 0,5 mm should not be exceeded.

Semi-conducting type

Over the outer semi-conducting layer, a semi-conducting tape must be used.

Screen

Screening of copper wires must have a minimum diameter of 0,5 mm and over that a copper tape applied helically with a minimum thickness of 0,1 mm.

Separator

Over the screen as well as under outer jacket, a separating layer must be used (e.g. taping).

Outer jacket

PE compound or PVC compound

Suitable for installation mostly for power supply stations, in indoors and in cable ducts, outdoors, underground and in water as well as for installation on cable trays for industries, switch-boards and power stations. Due to the good laying characteristic, this can also be laid easilyin difficult