1.Low reflection,stable and simple operation
2.Available for clear flat glass
3.8-10 m²/kg frosting capacity
4.Frosting time: 15-60 seconds (at 10-35℃)
5.Package: 25 kg/plastic bag
6.Validity: 2 years
7.Mixed weight ratio: 1 : 0.50 (the powder to Hydrochloric Acid)
8.Acid polishing required

1.Preparation
Frosting powder,hydrochloric acid(31% concentration), PVC or plastic containers, rubber gloves and safety glasses.

2.Frosting Solution Preparation
1. Put the powder in a PVC container.
2.Add hydrochloric acid slowly into the container with agitation.
3.Cover the mixed solution 1-2 days for maturation, stir twice per day.

3.Frosting Operation
1.Stir the solution well with a wood plastic or plastic rod, filter the solution with 10-20 mesh nylon material.
Note: the collected solid residue can readily be reused after mixed with hydrochloric acid(HCL acid).
2.Pre-treat glass surface with diluted HCL acid(5-10%), wash the glass with water.
3.Dip the glass into the frosting solution or spray frosting solution on the glass surface. Glass frosting time varies with frosting solution’s concentration and temperature.
4.Drip the glass for 10-25 seconds and wash with water.

4.Drying
Dry the glass with hot air.

5.Frosting Solution Refills
The concentration of the frosting solution will decrease after frosting a few hours. The concentrated frosting solution(1:0.30 or 1:0.40) should be added into the frosting working systems to maintain normal production.

6.Treatment of Waste Water
During frosting operation, acid waste water needs to be neutralized with lime water.

7.Safety Notes
1.Wear safety glasses and rubber gloves during frosting preparation and operation.
2.Carry out frosting operation in a ventilated room.
3.In case of contacting skin or eyes, wash immediately with running water.

Frosting Operation Diagram
Frosting Preparation→Frosting Operation→Wash and Dry→Products