Feature
■ CRDI (Common Rail Direct Engine) Simulator Equipment which 
   has fuel, cooling, intake, exhaust panel so that allows theoretical
   training and experiments.
■  Pressure gauge is attached on each range of hydraulic line on 
  A/T for circuit training of each shifting process.
■ Check terminal box is attached for the test of electronic circuits 
  and sensors with diagnose devise.
■ Exhaust muffler is specially designed with heat-resisting paint to 
  be maintained at high temperatures up to 600℃.
■ The entire process of ISO9001 and D.C.C.A.P.T of TQC method 
  of YES01 are applied in manufacturing.

Specification
■ Composition
  1) CRDI Diesel Engine Assembly 2,000cc, Turbo Intercooler
  2) Automatic Transmission Assembly
  3) Brake Master, Lever, Cylinder and Brake System
  4) All ignition related electric devices
  5) Injector, Fuel Filter, Fuel Tank, Fuel Pump, Fuel Devices,
     DC 12V Car Battery and Generator
  6) Cooling System such as Radiator, Overflow Tank, Relay, Electric Pan
  7) Exhaust System such as Catalytic Converter, Emission, Silencer
  8) Ignition Switch (Key S/W) Anti-vibration dampers and a urethane wheels
  9) Control box, fuel tank (removable), accelerator lever
  10) Stainless molding type safety guard is installed
  11) Radiator-only stand and laser processing protection panel
  12) Automatic Transmission Oil Pressure Gauge for Each Singular
      ?6 (1.5Mpa ?3, 2.5Mpa ?4)
  13) Vacuum Pressure Gauge ?1 (0.1Mpa)
  14) Fuel Pressure Gauge ?1 (1Mpa)
  15) Battery Voltage Gauge ? (30V)
  16) Cabinet type storage space with 2 door
  17) Fault insertion, control panel open and close feature and 3 stage
       PCB board mounted
  18) Option ? Euro 4, Euro 5, Euro 6 engine available.
■ Size : Approx. 1,800 X 1,800 X 1,600 mm
■ Weight : Approx. 480 kg

Training Contents
■ Various practices by self-diagnosis.
■ Measurement and inspection of Auto transmission.
■ Measurement and inspection of oil pressure at each A/T range.
■ Measurement and Inspection of Brake Hydraulics.
■ Assembly and Disassembly of Brake Lining.
■  Measurement of exhaust, Measurement and inspection of
  compression pressure of cylinder.
■  Measurement of radiator cap pressure and inspection of the leakage
  from the radiato.r
■  Operation test of Fuel pump, Measurement and inspection of Oil pressure.
■  Measurement and adjustment of tensions of timing chain and fan belt.
■  Measurement and adjustment of voltage and current in such as a
   charging circuits, start circuits.
■  Connector checking terminal for inspection of sensors and actuator.
■ Inspection of every part of intake and exhaust system.
■ I nspection of every part of each automotive electricity, fuel system,
   ECU, sensors and actuator.
■ Inspection of belts in cooling system and pumps.
■ Inspection of the rest of parts.