Feature
■  CRDI (Common Rail Direct Engine) Simulator Equipment which has fuel, 
    cooling, intake, exhaust panel so that allows theoretical training and
    experiments.
■  Easy to check and diagnose all faults that can happen in an actual 
    vehicle system so that it's able to do effective education concerning
    maintenance system.
■ Pressure gauge is attached on each range of hydraulic line on A/T 
   for circuit training of each shifting process.
■ Check terminal box is attached for the test of electronic circuits and 
   sensors with diagnose devise.
■ Exhaust muffler is specially designed with heat-resisting paint to be 
   maintained at high temperatures up to 600℃.
■ The entire process of ISO9001 and D.C.C.A.P.T of TQC method of 
   YES01 are applied in manufacturing.

Specification
■ Composition
  1) CRDI Diesel engine assembly, Turbo Intercooler
  2) Automatic Transmission assembly
  3) All ignition related electric devices
  4) Injector, Fuel Filter, Fuel Tank, Fuel Pump, Fuel Equipment, DC
     12V/60A Battery for Vehicles, Generator
  5) Cooling System such as Radiator, Overflow Tank, Relay, Electric Pan
  6) Exhaust System such as, Catalytic Converter, Emission, Silencer
  7) Ignition Switch (Key S/W) Anti-vibration dampers and a urethane wheels
  8) Control box, fuel tank (removable), accelerator lever
  9) Stainless molding type safety guard is installed
  10) Radiator-only stand and laser processing protection panel
  11) Automatic transmission oil pressure gauge for each singular
      ?6 (1.5Mpa ?3, 2.5Mpa ?4)
  12) Vacuum pressure gauge ?1 (0.1Mpa)
  13) Fuel pressure gauge ?1 (1Mpa)
  14) Battery voltage gauge ?1 (30V)
  15) Storage Space
  16) Fault insertion, control panel open and close feature and 3 stage
       PCB board mounted
  17) Option ? Euro 4, Euro 5, Euro 6 engine available
■ Size : Approx. 1,800 X 1,800 X 1,600 mm
■ Weight : Approx. 480 kg

Training Contents
■  Various practices by self-diagnosis.
■  Measurement and inspection of Auto transmission.
■  Measurement and inspection of Hydraulic measurement in
    accordance with A/T Range.
■  Measurement of exhaust, Measurement and inspection of
   compression pressure of cylinder.
■ Measurement of radiator cap pressure and inspection of the leakage
   from the radiator.
■ Operation test of Fuel pump, Measurement and inspection of Oil
   pressure.
■  Measurement and adjustment of tensions of timing chain and fan belt.
■  Measurement and adjustment of voltage and current in such as a
    charging circuits, start circuits.
■  Connector checking terminal for inspection of sensors and actuator.
■ Inspection of every part of intake and exhaust system.
■ I nspection of every part of each automotive electricity, fuel system,
   ECU, sensors and actuator.
■ Inspection of belts in cooling system and pumps.
■ Inspection of the rest of parts.