Feature
■  1,300cc Gasoline Engine Simulator Equipment that equipped with fuel, cooling,

     intake, exhaust panel so that it can be used for variety of theoretical

    training and simulating.
■  Easy to check and diagnose all faults that can happen in an actual

    vehicle system so that it's able to do

    effective education concerning maintenance system.
■ It is the best model to see operation state and location of components

   by making parts which aren't seen at an actual one open.
■ Check terminal box is attached for the test of electronic circuits and

  sensors with diagnose devise.
■ Compact size for storage efficiency.
■ Fault insertion, control panel open and close feature and 3 stage PCB

   board mounted.

Specification
■ Composition 

  1) Electrical Control Gasoline Engine Assembly,Auto Fault
  2) Electrical and electronic devices such as, ECM, TCM, AFS, CKP,
      CMP, O₂Sensor, WTS, Control Relay and etc
  3) Injector, Fuel Filter, Fuel Tank, Fuel Pump, Fuel Equipment, DC
      12V/60A Battery for Vehicles, Generator
  4) Ignition coil, Spark Plug, High Voltage Cables etc
  5) Cooling System such as Radiator, Overflow Tank, Relay, Electric Pan
  6) Exhaust System such as, Catalytic Converter, Emission, Silencer
  7) Start Switch (Key S/W) Anti-vibration dampers and a urethane wheels
  8) Control box, fuel tank (removable), accelerator lever
  9) Stainless molding type safety guard is installed
  10) Radiator-only stand and laser processing protection panel
  11) Vacuum pressure gauge ?1 (0.1Mpa)
  12) Fuel pressure gauge ?1 (1Mpa)
  13) Battery voltage gauge ?1 (30V)
  14) Drawer type storage space 1ea
  15) Fault insertion, control panel open and close feature and 3 stage
        PCB board mounted.
■ Size : Approx. 1,500 X 1,400 X 1,300 mm
■ Weight : Approx. 450 kg

Training Contents
■  Various practices by self-diagnosis.
■  Various practices by Electric-controlled gasoline engine tune-up.
■  Measurement of exhaust, measurement and inspection of compression

    pressure of cylinder.
■  Measurement of radiator cap pressure and inspection of the leakage

    from the radiator.
■  Operation test of Fuel pump, Measurement and inspection of Oil pressure.
■  Measurement and adjustment of tensions of timing chain and fan belt.
■  Measurement and adjustment of voltage and current in such as a
    charging circuits, start circuits.
■  Connector checking terminal for inspection of sensors and actuator.
■  Inspection of every part of intake and exhaust system.
■  I nspection of every part of each automotive electricity, fuel system,
    ECU, sensors and actuator.
■  Inspection of belts in cooling system and pumps.
■  Inspection of the rest of parts.