The RBEF-I Insertion Electromagnetic flow meter（Emagmeters） can be installed in any pipeline of internal diameter from 50mm (2in) to 8000mm (360in) through a small tapping.

The RBEF flow meters are ideal for use in process measurement and control, survey, leak detection, etc. applications such as leakage monitoring, and network analysis and in permanent locations where cost or space limitations preclude the use of conventional closed pipe meters.

Insertion Electromagnetic flow meter（Emag meters）

The RBEF-I has two models: Fixeddepth model and Pluggable model.

1. Fixed depth Insertion Magnetic flow meter

 2. Pluggable Model Insertion Magnetic flow meter

The RBEF tube is made from stainless steel or titanium and its outer diameter is Ф27mm. The probe is made from stainless steel or titanium and PEEK and its outer diameter is Ф34mm. For the pluggable model, the connection between the probe and the pipeline is made through G  screw or DN40 flange.

Specification 

1.   Suitable for pipeline size from DN50~DN8000mm；

Probe Insertion Depth Table

2. Velocity range: 0.1~1m/s or 0.1~10m/s, span can be setup from 0.5m/s~10m/s.

3. Accuracy: velocity v≥1m/s, the accuracy is ±1.5%;

            velocity 0.1m/s<v<1m/s, the accuracy is ±3%.

4. Liquid conductivity: >20μs/cm

5. Working pressure: 0.6MPa, 1.0MPa, 1.6MPa, 2.5MPa, 4.0MPa

6. Electrodes: SS316L，HC-22，HB3，Ti

7. Probe Material：SS304，SS316L, Ti (PEEK)

8. Maximum Liquid Temperature: PEEK 120℃

9. Enclosure IP: IP65、IP67，IP68 for remote type only

10. Maximum Cable Length: 100m (10m cable supplied if not specifically ordered)

11. Output Signal:   4~20mA, load: 0~500Ω;

                Pulse: 1~5KHz, load: 250~1.2kΩ;

                 Communications: RS232C、RS485、MODBUS etc.

12． Other specifications refer to RBMAG converter manual.