Hart mag flow meter transmitter made in China

 Feature  

● Total / accumulated total / flow rate

● Frequency flow inputs only

● Scaled pulse output

● 4-20ma analog output

● Alarm setter(2-relay)

Over View

The FT210 is a DC, AC powered indicator, Featuring 5 digits of rate and 8 digits of total. The FT210 series flow controller provides highly reliable results for industrial requirement with high quality and reasonable price The FT210 series has micro-processor inside, which makes it dependable and the controller also has pulse input such as sine wave, open collector, reed switch and even analog input. The FT210 series has Open Collector pulse output and external loop powered 4-20ma output.

General

Display      2-line * 12-character LCD Display Update Rate           0.25-second Decimal Points      Fully programmable for Rate and Total Time Base      The Rate can be displayed in unit per       second, Per minute or per hour Data Retention      Set up parameters and totals stored in       non-volatile memory with 10 years       retention. Operation Temperature      0 to 55℃ Power            AC110~220V  DC 24V Power Consumption  6VA Transducer Supply       8V / 12V / 24V selectable, 50ma max

Flow Inputs

Frequency(Pulse) Input Frequency Range :   Signal Type :       sine wave, open collector, reed switch,       proximity switch, voltage and current      pulse K-factor Range :       0.0001 – 50000.0000(the pulse per units)

Enclosure

Dimension  75㎜(H) x 55㎜(W) x 109.5㎜(D) Material    Aluminum Explosion   Exd IIB T6

Pulse Output

Function       Open collector output with a pulse      produced on each increment of the       accumulated total. Pulse Width   10 (negative going pulse) Duty Cycle :   49 pulses/sec. Max. Output  Current sinking output transistor 50ma,      30vdc max.(Pulse output is suitable for          driving remote counter or PLC’s)

Relay Output

Function High and low flow rate alar based       on the net energy. Max. Switching Power     100VA, 60W Max. Switching Voltage   AC250V, DC30V Max. Switching Current    6 Amps

4-20ma

Function     The flow rate is output.  Resolution    12-bit. Accuracy     Better than 0.025% Maximum Load        500 oh internally powered. 950 oh        Isolation    Isolated.  

Standards and Approvals

CE Manufactured under ISO 9001

Dimension

Ordering information