Application

Martindale abrasion tester and pilling properties tester. To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abradants at low pressures and in continuously changing directions and the amount of abrasion or pilling is compared against standard parameters.
The unique design of martindale tester allows removal of individual sample holders for examination without lifting the top motion plate. Martindale tester provides individual counters and parking function, interval time settable, large touch-screen display, Standard sample holders and 9 and 12kpa Weights are included.
Martindale Tester is available with 4, 6, 8 or 9 test positions     

Martindale abrasion tester and pilling properties tester Specifications

Drive system: PLC, programmable control with big Touch-screen

Adjustable test speed

Abrasion test

a)      Max stroke of movement: 60.5+/-0.5mm

b)      Weight of holder and spindle: 200+/-1g

Pilling test

a)      Max stroke of movement: 24+/-0.5mm

Weight of holder and spindle: 155+/-1g 

Martindale abrasion tester and pilling properties tester Models    

TF210A Martindale Abrasion And Pilling Tester-4 Heads

TF210B Martindale Abrasion And Pilling Tester-6 Heads

TF210C Martindale Abrasion And Pilling Tester-8 Heads

TF210DMartindale Abrasion And Pilling Tester-9 Heads       

Martindale abrasion tester and pilling properties tester Standard Accessories (included)

Abrasion test (To ISO 12947-1)

a)      Table specimen mounting Weight (2.5+/-0.5kg, 1Pc for both abrasion and pilling test)

b)      Abrasion tester holder (Dia. 38 mm,Set of 4)

c)      Small loading Weight (395+/-7 amount to holeder etc, set of 4)

d)      Large loading Weight (595+/-7g amount to holeder etc, set of 4)

Pilling Test (To ISO 12945-2)

a)      Linear adaptor. To convert to straight-line motion.

b)      Sample Retaining Rings for pilling test (Pack of 4)

c)      Pilling test holder (Dia. 90mm,set of 4)

d)      Loading Weight (260+/-1g, set of 4)

Auxiliary device for specimen mounting  

Standards   EN ISO 12945-2/12947-1/12947-2/12947-3/12947-4, ISO 20344, ASTM 4966/4970, BS EN 388/530, BS 3424/5690, JIS L1096, DIN 53863/53865, GB/T 13775, SATRA TM31, IS 12673, IWSTM 112/196, IWTO 40-88, SFS 4328, NEXT 16, GMW15651, ISO 5470-2, M&S 17 / 19 / 19C, Next 18/18a/18b, GB/T

4802.2/21196-1/21196-2, Wool Mark TM 112/196