Copper-Nickel Cu70/Ni30 Alloy
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- China
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- copper-nickel cu70ni30 alloy supplier in iceland, copper-nickel cu70ni30 alloy wire manufacturer, copper-nickel cu70ni30 alloy pipe, copper-nickel cu70ni30 alloy sheet
- Category
- Copper Alloy & Profiles
Heanjia Super-Metals Co., Ltd
- Verified Certificate
-
8
Product name | Copper-Nickel Cu70/Ni30 Alloy | Certification | - |
---|---|---|---|
Category | Copper Alloy & Profiles | Ingredients | - |
Keyword | copper-nickel cu70ni30 alloy supplier in iceland , copper-nickel cu70ni30 alloy wire manufacturer , copper-nickel cu70ni30 alloy pipe , copper-nickel cu70ni30 alloy sheet | Unit Size | - |
Brand name | - | Unit Weigh | - |
origin | China | Stock | - |
Supply type | - | HS code | - |
Product Information
Copper-Nickel
Cu70/Ni30 Alloy offers outstanding resistance to corrosion, especially in sea
water, soil erosion and abrasive fluids. Cu70/Ni30
Alloy is stronger than Cu90/Ni10 and has resistance to impingement
corrosion, biofouling etc. It has good ductility, high strength and low
temperature coefficient of electric resistance. The content of nickel in the
copper-nickel alloy enables it to retain its properties over the high
temperatures.
Corrosion
resistance Properties of Cu70/Ni30 alloy
The copper-nickel alloy has great resistance to seawater corrosion
and biofouling. It offers long term performance in the crevice corrosion and
good tolerance in the marine water. It has high corrosion resistance in the sluggish
or stagnant conditions that may occur while the commissioning of a plant.
The copper-nickel Cu70/Ni30
alloy has good corrosion resistance due to its security layer that is
produced when it is kept in water. It doesn’t suffer the stress corrosion
cracking. The following table shows the corrosion nature of Copper-nickel
alloys in the seawater (heat exchanger service)
Media |
Corrosion
type |
Service
experience |
|
Waterside
conditions |
|||
Clean
seawater at velocity about 1m/s |
Uniform,
general |
0.0025
to 0.025 mm/a |
0.0025
to 0.025 mm/a |
Clean
seawater at velocity about 3.5 m/s |
Impingement
attack |
Satisfactory
|
Satisfactory |
Polluted
seawater |
Accelerated
general and pitting |
Less
resistant |
Recommended
but not immune |
Entrained
sand in seawater |
Accelerated
general and erosion |
Unfit,
except in mild conditions |
Use
CuNi30Fe2Mn2 |
Accumulated
deposits on surface |
Local
attack |
Generally
good |
Tendency
to pitting corrosion |
Hot
regions by local overheating |
Local
attack by denickelification |
Good |
Good
however some failures in intense conditions |
Corrosion
plus stress |
Stress
corrosion |
Highly
resistant |
Highly
resistant |
Vapour
side conditions |
|
|
|
Feed
water heaters operating under cyclic conditions |
Exfoliation
attack |
Resistant |
Susceptible |
Non-condensable
gases |
Local
attack and general thinning |
High
resistance |
Excellent
resistance |
Hydrogen
sulphide in desalination plant |
General
attack |
Less
resistance |
resistance |
Properties of
Copper-Nickel alloys
Property |
Minimum Value |
Maximum Value ( |
Units |
Minimum Value |
Maximum Value |
Units |
||||||
Atomic Volume (average) |
0.0071 |
0.0073 |
m3/kmol |
433.268 |
445.473 |
in3/kmol |
||||||
Density |
8.5 |
8.95 |
Mg/m3 |
530.638 |
558.731 |
lb/ft3 |
||||||
Energy Content |
140 |
180 |
MJ/kg |
15167.4 |
19501 |
kcal/lb |
||||||
Bulk Modulus |
130 |
170 |
GPa |
18.8549 |
24.6564 |
106 psi |
||||||
Compressive Strength |
85 |
550 |
MPa |
12.3282 |
79.7708 |
ksi |
||||||
Ductility |
0.03 |
0.44 |
|
0.03 |
0.44 |
|
||||||
Elastic Limit |
85 |
550 |
MPa |
12.3282 |
79.7708 |
ksi |
||||||
Endurance Limit |
138 |
240 |
MPa |
20.0152 |
34.809 |
ksi |
||||||
Fracture Toughness |
26 |
79 |
MPa.m1/2 |
23.6612 |
71.8937 |
ksi.in1/2 |
||||||
Hardness |
580 |
1650 |
MPa |
84.1219 |
239.312 |
ksi |
||||||
Loss Coefficient |
1.5e-005 |
0.00056 |
|
1.5e-005 |
0.00056 |
|
||||||
Modulus of Rupture |
85 |
550 |
MPa |
12.3282 |
79.7708 |
ksi |
||||||
Poisson's Ratio |
0.34 |
0.35 |
|
0.34 |
0.35 |
|
||||||
Shear Modulus |
45 |
58 |
GPa |
6.5267 |
8.41219 |
106 psi |
||||||
Tensile Strength |
267 |
624 |
MPa |
38.7251 |
90.5036 |
ksi |
||||||
Young's Modulus |
120 |
156 |
GPa |
17.4045 |
22.6259 |
106 psi |
||||||
Glass Temperature |
|
|
K |
|
|
oF |
||||||
Latent Heat of Fusion |
220 |
240 |
kJ/kg |
94.5825 |
103.181 |
BTU/lb |
||||||
Maximum Service Temperature |
425 |
480 |
K |
305.33 |
404.33 |
oF |
||||||
Melting Point |
1384 |
1508 |
K |
2031.53 |
2254.73 |
oF |
||||||
Minimum Service Temperature |
0 |
0 |
K |
-459.67 |
-459.67 |
oF |
||||||
Specific Heat |
384 |
386 |
J/kg.K |
0.297162 |
0.298709 |
BTU/lb.F |
||||||
Thermal Conductivity |
19 |
66 |
W/m.K |
35.5686 |
123.554 |
BTU.ft/h.ft2.F |
||||||
Thermal Expansion |
16 |
17 |
10-6/K |
28.8 |
30.6 |
10-6/°F |
||||||
Break down Potential |
|
|
MV/m |
|
|
V/mil |
||||||
Applications of Cu70/Ni30 alloy
Seawater condenser system and desalination plants:
The excellent resistance to sea water corrosion makes the copper-nickel Cu70/Ni30 alloy useful in the sea water condensers and desalination plants and
pipe working in the chemical plants.
Automotive applications: Because the copper-nickel alloy Cu70/Ni30
doesn’t need surface protection, it provides additional security therefore it
is commonly used in the brake and hydraulic suspension systems. It is also used
in cooling systems in the automobiles like cars and other commercial vehicles.
Marine Engineering: Excellent resistance to
biofouling and sea water corrosion provided by copper-nickel Cu70/Ni30
alloy
makes it highly useful in the various marine applications including cladding
for ship hulls, legs of oil rig platforms and sea water intake screens.
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Jialiang Zhao
- Address
- Rong Jing Dao, Rongjing West Road, Yizhuang Technical Economic Development Area
- Product Category
- Other Machinery Parts,Other Minerals & Metallurgy Products
- Year Established
- 1984
- No. of Total Employees
- 51-100
- Company introduction
-
A professional and ISO certified manufacturer and supplier of corrosion resistant and high temperature performance metals and alloys such as Nickel,Kanthal, Inconel, Incoloy, Hastelloy, Nichrome, Nilo, Monel and Cupronickel and more are in line. We produce the alloys in the various standard forms including wire, rod, strip, pipes, sheets, tubes, bars, tape and more in the specific sizes as required by our customers. Our factory is established in China and sales office in Seattle, USA. We have worked with the diverse of industrial sectors for example aerospace, marine, automotive, nuclear, power production, pollution control and chemical engineering. Customers are assured of receiving fully tested products for their applications. Speak with our sales executive today.
- Main Markets
-
North Korea
- Main Product
Related Products
Copper Alloys
CADMIUM FREE SILVER BRAZING WELDING RODS SILVER SOLDER BARS
COPPER TUBE
Copper/ Copper alloy pipe, fittings, flanges and stainless fittings, flanges and Nipples
EDM WIRE