Ubiprog 5000 programmer is High performance Universal eprom Programmer. Universal ubiprog 5000 programmer is the replacement of SUPERPRO 611S programmer, Ubiprog5000 flash programmer designed for supporting Flash memories, Nand flashes, Serial EEPROMS, Microcontrollers & Automotive ECU, Dashboard parts.

from vipprogrammer.com
Universal ubiprog 5000 programmer will replace SUPERPRO 611S programmer

Ubiprog 5000 EEPROM Flash Programmer (48Pin socket)

UBIProg 5000 Programmer is very fast, Low cost, High performance Universal Programmer, specially designed for supporting Flash memories, Nand flashes, Serial EEPROMS, Microcontrollers & Automotive ECU, Dashboard parts. The Heart of UBIProg 5000 is a 500.0000 Gate FPGA with a designed CPU core with 96MHz Clock for fast programming of chips.

Ubiprog 5000 programmer Features:

21000 Supported Devices  Flash Memory (Parallel / Nand /Serial) , EPROM , EEPROM , Serial EEPROM , Microcontroller , NVRAM , FRAM , CPLD , PLD , FPGA).

48-Pins ZIF Socket with Pin Continuity tester & 10-Pins ISP/JTAG Connector.

USB 2.0 High Speed ,Program 1 Gbit Nand Flash less than 50 sec , Reading Serial Flash memory with 6 Mbit/Sec Speed.

Auto detection of all flash Memories/Microcontrollers with Device ID.

User friendly software for WIndows XP/VISTA/7 (32,64 bits).

Multiple Programming is possible by attaching 2 or more Programmers to one PC.

Very low cost Main Unit & Low cost adaptors by using one adaptor for all 32/40/48 TSOP flash memories . All 56 pins flash memories by one TSOP56 adaptor.

Special Abilities like, ALtera U S B B l a s t e r Emulation for Quartus Software, Serial Port Emulation , Vehicle ECU , Immoblizer & Dashboard microcontroller Support.

Parallel Flash Memories: up to 56 pins parallel flash memories are supported by UBIProg5000. it Supports different kind of packages (PLCC , TSOP1 , TSOP2 ,VSOP  & ...). All Flashes can be automatically detected by software in case of unreadable device names. By using a single adaptor for all 32-48 pins TSOP flashes , user only need 1 adaptor for over 1000 flash chips.

Nand Flash Memories: UBIProg 5000 has an additional Nand+ software , specially designed for Nand flash memories. Nand+ Software has one of the most complete list of Nand flash Memories with algorithms for correction of bad data in MLC Nand Flashes. UBIProg5000 is one of the fastest Nand Programmers in the world with Read & Write Speed up to 8 MegaByte per Second. All Nand Flashes can be automatically detected by software in case of unreadable or remarked device names.

Serial Flash Memories: All 8-16 Pins Serial SPI flash memories are supported by UBIProg5000. All SPI flash Memories can be detected automatically by software in case of unreadable device names. It reads & programs SPi flashes with maximum safe speed on ZIF (6-7 Mbit/second)  .  Also it Unprotects  the write protected flashes before writing data to it.