Keener portable Pump  DC12-12

Keener portable Pump DC12-12


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
Taiwan
Payment Terms
Negotiable
Production method
Negotiable
Shipping / Lead Time
Negotiable / Negotiable
Keyword
pump, keener pump
Category
Pumps

HONG YI CO., LTD.

Membership
BIZ
Country / Year Established
Taiwan Taiwan / 1960
Business type
Manufacturer
Verified Certificate

9

Product name Keener portable Pump DC12-12 Certification -
Category Pumps Ingredients -
Keyword pump , keener pump Unit Size -
Brand name - Unit Weigh -
origin Taiwan Stock -
Supply type - HS code -

Product Information

 

PUMP:
This pump unit is a totally enclosed, submersible .,Pumping unit. It is powered by a 0.3 hp. 12 volt
DC, 20 Ampere motor. Battery clamps on the power cord for ease of connection to any 12 volt vehicle battery.
SWITCH:
The ON – OFF switch is located inline on the power Cord.
BATTERY CONNECTION:
Check the position of the ON-OFF switch make certain the switch is in the OFF position befor connecting to the battery, using this connection procedure arcing is eliminated. Connect the RED battery clamp to the POSITIVE battery terminal. Connect the BLACK
Clamp to the NEGATIVE or ground to a rigid metallic Surface on the engine. The connection should be 12 to 19 inches from the battery.
HOSE:
Since the pump has a lower discharge pressure it is .,Recommended that anoncolapsiable hose be used for Maximum pumping capacity.
HOISTING & LOWERING:
Use the attached nylon line. Do not use the power cord .,For handling the unit.
OPERATION OF UNIT:
Lower the unit into the liquid to be pumped(NOTE: THIS UNIT IS NOT TO USED TO PUMP
FLAMABLE LIQUIDS).Then turn on the switch.
Pump can be run for a few minutes(less than 5) Without liquid. Do Not run completely dry for any extended period(less than 5 Min.).This will prevent.
RUNNING TIME PEROIDS:
The unit draws 20-25 amperes and can be operated for Approximately 1 Hr. on a fully charged 60 Amp-Hour Battery and still be able to start the vehicle under normal conditions. CAUTION should be used when running times exceeds 25 – 30 minutes without the engine running to recharge the battery. Also be mindful of COLD temperatures which lowers battery efficiency. Review Battery size(AMP-Hour rating) and the use of other Accessories, lights , radios. etc while operating pump Without engine operating.
OVERLOAD PROTECTION:
Overload protection is provided with an INLINE 25 AMP FUSE. Location is approximately 6 Inches below the RED(POSITIVE) battery .,Clamp Unit uses Std. Automotive 25 amp Fuses.

 

B2B Trade

Price (FOB) Negotiable transportation -
MOQ Negotiable Leadtime Negotiable
Payment Options Negotiable Shipping time Negotiable

HONG YI CO., LTD.

Country / Year Established
Taiwan Taiwan / 1960
Membership
BIZ
Business type
Manufacturer

9

President
Miss Lin
Address
No.20-133 Ko-His Liao, Shuishang Hsang,Chia-Yi Hsien, Taiwan
Product Category
Pumps
Year Established
1960
Company introduction

 

Our chief engineer’s career spans 47 years in the pump industry, holder of many patents relating to Sewage, Grinder-Pumps, and level controls.

Worked on Grinder Pumps during early 1960’s, the beginning of the low pressure Sewer Grinder market, at that time there were only 2 major companies manufacturing grinder pumps during this time period. One company utilized progressive cavity design; the second company utilized conventional centrifugal designs.

In the early 1970’s co-developed the single stage cutter design with a “vortex” centrifugal impeller that has since been imitated by most all present companies that offer a Grinder Pump along with a vortex designed impeller. The Asian pump mfg.’s now imitate this grinding concept.

In the early 1970’s the co-development by our chief engineer of the vortex centrifugal impeller concept was pioneered that did not infringe on the vortex patents that were in force during this time period. This allowed the whole industry to start utilizing the vortex centrifugal concept without having to pay a licensing fee, the rest is history. There is a vortex unit offered in most all pump companies product lines today.

In mid 2004 a revolutionary new 2 stage vortex centrifugal concept for a Grinder Pumps or Sewage Pumps was developed and patented by our chief engineer. The Grinder Pump utilizing 2 stage design has allowed engineers to expand their designs for the low pressure Sewer projects, allowing higher discharge heads that exceed present day designs of the progressive cavity units, but more important the 2 stage centrifugal design offers higher scrubbing velocities, so necessary for efficient movement of the macerated solids in the effluent which causes frequent line clogging, this relates to lowering operation and maintenance costs, which is so often overlooked in project initial concept.

In early 2005 the 2 hp. 115 volt single phase Grinder Pump was developed that worked, has now been imitated by other pump companies in so short a time span, another example of the innovation that is a hall mark of our product line. Imitation is the highest compliment that can be paid to a company.
Our product line has expanded 2 hp. To 15 hp. Grinder Pumps, our Sewage and Effluent Pumps 1/3 hp. To 25 hp. In vortex and 2 vanes non clog centrifugal designs. Along with accessories such as Guide rails and attachments.

Our success is based on listening to our market and responding with innovating solution designs per the suggestions of the “low pressure Sewage design engineers”, “the operation and maintenance personnel,”  “sales engineers” of the Sewage Pump industry we serve.

To all of you our valued customers, we pledge our best efforts to innovate, engineer and build the highest quality product we are able to produce. All of you are the reason for our company’s success now and in the future, may we never lose our ability to” “listen,” “innovate” and to “serve” all of you.

 

Main Product

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My TK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more