Adjustable Applicator
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- China
- Brand name
- BEVS
- Payment Terms
- T/T
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Category
- Other Measuring & Gauging
BEVS Industrial Co.,Ltd.
- Verified Certificate
-
9
Product name | Adjustable Applicator | Certification | - |
---|---|---|---|
Category | Other Measuring & Gauging | Ingredients | - |
Keyword | adjustable applicator , lab applicator , tiny applicator | Unit Size | - |
Brand name | BEVS | Unit Weigh | - |
origin | China | Stock | - |
Supply type | - | HS code | - |
Product Information
1.Introduction
BEVS1806 Adjustable Film Applicator
is designed based on ASTM D 823 E with two built-in metric micrometer heads for
adjusting the knife blade so that clearances of the blade can be accurately set
from 0-10mm in 0.01mm increments.
The applicator consists of:
• A special anodized
aluminum frame to guide the knife blade. The frame has two end
sections which serve as hand grips
for the operator when drawing down wet films.
• A STAINLESS STEEL knife
blade with a precision ground edge. The slides in slots in the
end sections which allows vertical
adjustments of the blade.
• Two springs attached to
the knife-blade and top plate. These exert an upward pressure on
the blade and maintain it in contact
against the two micrometer spindles to retain gap
settings of the blade.
• Two precision made
micrometer heads that can easily be set to give film thickness from
0-10mm in increments of 10 microns.
The accuracy of the micrometer heads is ± 2 microns.
• Imperial micrometer
heads are available if required.
• Complies with ASTM D 823
Practice E
2 Specification:
BEVS1806/50/100/150/200/250/300 Film Width:50/100/150/200/250/300mm Accuracy:±2um
3. Method of use:
Wet films of uniform thickness can
be produced with the knife blade set for the desired
thickness.
1.
Place applicator at
upper end of test panel.
2.
Pour coating sample
directly in front of knife-blade.
3. Draw applicator slowly towards
the lower end of test panel.
4. Clean applicator with appropriate
solvent immediately after use.
4. Calibration:
Before use check the zero settings of the micrometer heads as follows:
1,Place applicator on a polished
plate glass of suitable size. Set micrometer heads to zero.
2,When the applicator is placed
between the observer and a bright light the blade should touchthe glass from
end to end and not lift the end section. The zero point should check within±1,division
of the micrometer - this is set at manufacture.
If applicator does not zero and resettings are required proceed as follows:
Set the micrometer heads to zero,
loosen the micrometer clamp set screws, press the knifeblade down onto the
glass plate, press down the micrometer heads until their spindles are
contacting the blade and then
tighten the micrometer clamp screws.
5.Maintenance
1. There
will have the film error as the knifeblade appears crack and transformation by
the falling and crash. So take good care of the equipment when it is in process
of use.
2. Screw
is not allowed to tear down as the calibration was already finished before
delivery. Or it will have the error.
6 order information
BEVS
1806/50 Adjustable Applicator 50mm Width
BEVS
1806/100 Adjustable Applicator 100mm Width
BEVS
1806/150 Adjustable Applicator 150mm Width
BEVS
1806/200 Adjustable Applicator 200mm Width
BEVS
1806/250 Adjustable Applicator 250mm Width
BEVS
1806/300 Adjustable Applicator 300mm Width
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | T/T | Shipping time | Negotiable |
- President
- Owen Chan
- Address
- Rm1818, Dongcheng Int’l Plaza,No.3, Huangpu East Road,Guangzhou City, China
- Product Category
- Electronic Measuring Instruments,Measuring & Analysing Instrument,Testing Equipment
- Year Established
- 2004
- Company introduction
-
BEVS Industrial Co.,Ltd. is a leading manufacturer that specializes in coatings, ink, painting, resin testing instruments and laboratory whole solution.We offer the complete and unique products in this field to meet customer's challenging demands of today and tomorrow, the products are complied with the standards of ISO, ASTM, DIN, BS, EN etc.With strong supports and hard work by lots of end-users and worldwide agents, BEVS become more and more famous in the world and provides more competitive values for our customers.
- Main Markets
-
Australia
Japan
Viet Nam
- Main Product