Single Liquid Type HIgh Pressure Grouting Machine
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- China
- Brand name
- NOVA
- Payment Terms
- L/C,T/T
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
- Keyword
- grouting pump, injector, grout machine, grouter
- Category
- Other Construction Machinery
Nova Industries Co., Ltd.
- Verified Certificate
-
9
Product name | Single Liquid Type HIgh Pressure Grouting Machine | Certification | - |
---|---|---|---|
Category | Other Construction Machinery | Ingredients | - |
Keyword | grouting pump , injector , grout machine , grouter | Unit Size | 32.0 * 50.0 * 20.0 cm |
Brand name | NOVA | Unit Weigh | 8 mg |
origin | China | Stock | - |
Supply type | - | HS code | - |
Product Information
High pressure grouting machine
◆Introduction
Weight | 8 KG |
Maximum output pressure | 13500PSI |
Pressure of starting again | less than 7500PSI |
Safe range of high-pressure hose | less than 13500PSI |
Safe range of switch valve | less than 10000PSI |
Safe range of grease coupler | less than 16000PSI |
High pressure grouting machine is the professional machine for structure reinforcement, leak stoppage, inject polyurethane and epoxy resin materials with quick disassembly, easy to maintain and super high pressure. The parts of machine are not deformed when being injected. Besides, its small volume can avoid the inconvenience of heavy machinery for workers. Therefore it is the best choice for the persons who work on the professional water-sealing project.
◆Suitable Materials
Polyurethane foam, epoxy resin, waterproofing plugging agent, insulation materials etc.
◆Application Places
Leakage blocking, reinforcing and strengthening for underground, floor, second construction joints, subway, tunnel, dam, structure hives, concrete crack etc.
◆Accessories
Drill | 1 SET 550W |
High Pressure hose | 1 PC 5M |
Shut-off Value | 1 SET |
Repairing Kit | 1 SET |
Seal Set | 1 SET |
T Type Wrench | 1 SET |
Rubber Pad | 10 PCS |
Grease Coupler | 1 PC |
Filter | 1 PC |
Material Cup | 1 SET |
◆Direction for Use
1. The new injection pump should be lubricated by the lubricant before using. The body and the accessories should be mopped with a lubricant saturated cloth.
2. Pour the even polyurethane or epoxy into the material cup and cower the lid. Turn the switch to open and the injector to then dust bin.
3. Turn of the power switch, expel the lubricant from the hose until the medicament come out. Turn off the power and then the switch valve.
4. After construction, clean up the injection pump immediately with special cleanser (acetone or xylene). Pour the cleanser into the material cup and expel it from the hose. Put the injector into the material cup, turn on and off the switch valve for several times to create pressure in the hose. It help clean. After 3 to 5 minutes, expel the cleanser from the pump to the dust bin.
5. After that, lubricant is necessary for maintain to avoid residue blocking in the hose, let it cycles one time for maintenance.
◆Matters needing attention
Perfusion when wear protective supplies (such as gloves, masks, goggles) to avoid direct contact with the skin, such as contamination of slurry please rinse with water, When the eyes are touched the product, first rinse with plenty of water then immediately go to the hospital.
◆Troubleshooting
1. Ask: Leaking in the nozzle while injection?
Answer: The rubber nut wears out in the nozzle. Dismount the nozzle and replace it with a new one.
2. Ask: The pressure of the pump cannot raise?
Answer: Take of the four hexagonal screws in the pressure increasing cylinder, clean groove in the pressure pump with hard brush (steel brush) and steel ball, spring and pressure increasing cylinder. If the surface of the steel ball is not smooth enough, please replace it and assemble it. Adjust the screw, any leaking while injection, please adjust the screw with the special spanner. If it can’t be adjust, please change the washer. Take off the four.
3. Ask: Piston if full of the residue?
Answer: Clean up the residue on the piston.
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | L/C,T/T | Shipping time | Negotiable |
- President
- Amy
- Year Established
- 2000
- Company introduction
-
NOVA INDUSTRIES COMPANY LIMITE founded in year of 2000, NOVA Industries has more than 10years history, we have rich experience in production, we specialize in producing many different PVC and metal tile trims, flooring trim, carpet trim, skirting, kitchen plinth,stair nosing, corner bead, wall corner, cable trunk ects plastic and metal building decoration products.
We are now exporting to many different countries, such as Philippe, Malaysia, Korea,India, Indonesia, Russia, Ukraine, Dubai, Saudi Arab, Sri Lanka, UK, Australia, Brazil, Mexico, Africa area ects,
We insist offering customer the most reasonable & economical price with highly quality guaranteed products as well as our best services, In the future, NOVA will continue to keep the customers buying the quality first products with a most reasonable and competitive price.
If you want to cut down your purchasing cost right now, or when you are plan to looking for high quality guaranteed building decorations products at a reasonable price, Pls. feel free to contact us at any time, when you choose us as your business partner, you will see we always do better than what you can expect.
- Main Product
Related Products
CATERPILLAR EXCAVATOR SPARE PARTS
5ton Press Packer
Quick Coupler DMQ series
KOMATSU EXCAVATOR SPARE PARTS
DAEMO Hydraulic Shear DMS360 (Excav. 33~45T)