Ecosens

│ Overview │

The Ecosens is an all-in-one type eco-friendly device combined with air quality sensor and USB charger together, which senses to air contaminants in a car and warns a driver by both the flickering LED light and the alarming buzzer. It enables the driver to open the window to let in fresh air, to check the air filter, and to clean inside of the car.

│ Major Features and functions │

• Worldwide 1st all-in-one type smart eco sensor and USB charger
• Made-in- Korea product with Japanese sensor
• Sensing to gaseous air contaminants and alarming functionality
• Smart monitoring for air pollution; alarm makes from 200 to 300ppm
• Minimized ripple noses to extend the battery life of the devices being charged tablet PCs running under IOS and Android, MP3 and digital cameras, etc.
• Works with both 12V and 24V fitting to any auto vehicles

│ Specifications │

• 20MHz microprocessor with 1K flash memory
• Smart VOC (Volatile Organic Compounds_ gas sensor
• Sensing gases are carbon compound monoxide, hydrocarbons from vapors of gasoline, any other incompletely burnt components of fuels and organic nitrogen compounds as well as cigarette smoke and concentrated effluvia from decomposing matter. Besides those volatile organic compounds, also permanent emission sources, like organic solvents, alcohols, paints and adhesives which lower the quality of air can be detected and warned by an alarming buzzer.
• Charging indication LED&2-color gas sensor LED(in green/orange
• Micro buzzer alarming at maximum 78dB
• Wide input voltage from 8VDC to 40VDC using car cigarette lighter charger
• Output current 2.1A P& power consumption of 10W
• Protection circuitry for over-voltage/current, inverse voltage, and minimized ripple noises

│ Other Information │

• 2013 PIN UPP Design Award
• Fancy and ergonomic design &semi-glossy coated housings with two tone colors(black &light gray)
• Blister gift case
• KC/CE/FCC fully certified & RoHS compliance
• Recommended operating temperature at 0 ˚C to 40 ˚C(for gas sensor)
• Physical dimensions at 76x28x26mm
• Net weights at 20g
• Any cable is not included

│ Operational Process │

• Power On
  Connect the Ecosens to the on-car socket. The red power LED turns on when ready for charging and sensing to air pollution sources. Initialization process: the sensor LED flickers green and orange 2 times, then the buzzer beeps twice. - Sensor Warming-up It will take 3 to 5 minutes to warm0up the sensor before the Ecosens will start operation. During that time sensor LED keeps green.



• Sensor
  Detection the sensor LED stays green unless air pollution sources are detected. When air pollution sources are detected, the LED flickers orange and the buzzer alarms until the air quality is getting better or becomes normal.



• Power off
  Disconnect the Ecosens from the car socket. All LEDs turn off.

│ Six features of the Ecosens│