Hot sell 3D printer 1.75mm ABS filament rolls
Negotiable Min Order Quantity Unit
- Required Quantity
-
- Place of Origin
- Brand name
- XINMAI
- Payment Terms
- Negotiable
- Production method
- Negotiable
- Shipping / Lead Time
- Negotiable / Negotiable
Dongguan XinMai Electronic Tech Co.,Ltd.
- Verified Certificate
-
10
Product name | Hot sell 3D printer 1.75mm ABS filament rolls | Certification | - |
---|---|---|---|
Category |
Stationery & Printing
Plastic Products Plastic Tubes & Pipes Other Plastic Products |
Ingredients | - |
Keyword | abs filament rolls , filament rolls , hot sell 3d printer abs filament rolls , hot sell abs filament rolls | Unit Size | - |
Brand name | XINMAI | Unit Weigh | - |
origin | Stock | - | |
Supply type | - | HS code | 3916909000 |
Product Information
Hot sell 3D printer 1.75mm ABS filament rolls
PLA filament characteristics:
(1)No block nozzle, good stick hot bed, a smooth PLA used
(2)can be processed at 185 degrees
(3)low shrinkage, thermoforming dimensional stability
(4)Good toughness high strength, high stiffness
(5)No-toxic, odor harmless, good smell
ABS is commonly used in 3D printing, has the following characteristics:
(1) high strength, good toughness;
(2) density is small, when printing larger volume model lighter, save money;
(3) cost-effective, can be processed in wide range temperature;
(4) softer than PLA;
(5) diameter of 3.0/1.75mm, variations + /-0.1mm,roundness +/-0.05mm;
(6) 1 kg /plastic spool packaging, can be automatic feed;
(7) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc..
Our ABS filament advantages compare to other ABS filament:
We select of premier grade ABS material, low water absorption, high tough. Factory direct sales, inexpensive, buy more, bigger discount! !
Production Control:
1.Produce process
I . Before produce extruding filament ,we will dry ABS and PLA for a enough time (3-5 hours).
II. Mix with colors masterbatch or colors powder, all which .certified with ROHS.
III.Adjust temperature and dragging rate , make filament diameter range at 1.6-1.8mm/2.8-3.0mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.05kg
IV we put all filament spool in shelf, different kind in different shelf, all categories arrange orderly.
2.Productiong quality control
I. we have diameter laser detect kits to control extruding rate on line, when diameter smaller or higher than accept range, the laser detect kits will adjust the extruding rate higher or smaller to make diameter range at acceptable.
II.keep each record filament samples sent to customers, build a tracking able document.
III.when the filament put on shelf longer than half a year, we will dry the filament again.
3.About waste & recycle
Much time you will find some black filament is too brittle, that added and mixed with some recycle and scrap after produced.
We haven’t produced with scrap outlet, rework&recycle material, or dispose, but for quality assurance purpose.
4.Packaging
We put each filament /spool on seal PE bag with desiccant , then smaller carton, then out big box
We also have vacuum heated bag to replace of PE bag, make better avoid moisture.
5.Research and developing
we have engineers that specialty in color formulation ,plastic modification, packaging, quality control ,producing control, we can do according to your requirements .
we have colors:
Natural, white, black,red, sky blue, dark blue ,florescent green,dark green, florescent yellow, dark yellow ,orange, purple, pink, grey, brown,glow in dark etc
B2B Trade
Price (FOB) | Negotiable | transportation | - |
---|---|---|---|
MOQ | Negotiable | Leadtime | Negotiable |
Payment Options | Negotiable | Shipping time | Negotiable |
- President
- Jason
- Address
- Gaoxin Industry, Nancheng District, Dongguan City, Guangdong Province, China
- Product Category
- Other Plastic Products,Plastic Tubes & Pipes,Stationery & Printing
- Year Established
- 2000
- No. of Total Employees
- 51-100
- Company introduction
-
XinMai Tech manufacturer in China, We are professional making 3D printer filament factory.The main production is the modified ABS and PLA, PVA Nylon PA Conductive PP HIPS PETG filament, etc. Be localed in DongGuan city, have 8500 square meters area. We have professional and technical team, research and development products. 3 production line equipment, the whole process automatic control of the quality of the computer image, the production quality is excellent, stable performance.There are 30 tons output capacity, 10 tons stock per month. We do exports and domestic sales, the national each big city, export to Europe and America and East Asia and so on. Welcome customer and friends to visit factory and guidance.
- Main Markets
-
China
Germany
South Korea
U. Kingdom
U.S.A
- Main Product