marine incinerator

Overview

The incinerator is equipped with two doors, which are intended for ash removing, the incinerator in stand-by mode (Com.Tem. less than 220℃), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till Com.Tem. less than 100℃ and incinerator fully stop. Meanwhile, there is a feeding device available for solid waste feeding continuously during system in operation.

The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and operator panel. The electric panel is built according to international standards for marine equipment. The operator panel which is located at the right side of the control panel has a touch screen and defined keys for system starting /stopping and selecting burner modes.

The burning process is controlled by the PLC and monitored by the HMI(Human Machine Interface) and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.

Usage

The marine Incinerator which is designed for on board incineration of

ship’s waste oil and solid,

Main parts

Incinerator

Burner

Combustion chamber with diesel oil burner, sludge burner, and electric control panel

Flue gas fan

Flue gas damper

Sludge tank with circulating pump and heater

Sludge circulation pump

Sludge dosing pump

Electrical control panel

Expansion Bellow

Feeding Set

Three different heat forms,

you can choose any of them

Electric Heater

Steam Heating

Thermal oil heating

Approval

RS , USCG , CCS ,NK,etc