Spray drying granulation process : First, the good by ball milling the slurry was further stirred tank Stir and heat to more than 35 ℃, and then apply pressure to a stirred tank , under the pressure of the slurry was sent to the atomizer , nebulizer after atomized into a spray tower from the lower portion of the tower body. The gas turbine is sent to the heat exchanger a gas distributor on top of the tower , after the gas distributor uniformly form the tower into the cyclone -shaped , the atomized slurry was granulated and dried . After the pellets and the hot gas contact surface of the liquid will evaporate quickly , and the internal gas in a subsequent drying process to migrate to the surface of the hot gas is taken away . The dried pellets fall to the bottom of the tower , be recovered through a pair of gap-type butterfly valve . After drying the slurry gas containing a small amount of hexane, and after vaporization of fine dust , the gas is supplied to the first cyclone pressure blower , wherein the preliminary separation of dust , condensation , and then supplied to a column leaching . In the leaching tower , get into the gas sufficiently washed with hexane and the gas contained in the gas is condensed , collected in the bottom of the elution column , washed again through the gas oil is sent to a heat exchanger for heating a gas , are repeated use . During operation the system remains slightly positive pressure state by a delivery valve and one exhaust valve automatic control.

1/4GG-SQ square spray nozzle has a removable vane inside ,which make it easy to clean.

Ordering information of 1/4GG-SQ square spray nozzle(YBS brand)

Materials: None=brass                  

               I=mild steel                   

               SS=303stainless steel（bar stock）

               316SS=316stainless steel（bar stock）

1/4 1/4GG-SQ-10SQ 1/4GG-SQ-I10SQ 1/4GG-SQ-SS10SQ                1/4GG-SQ-316SS10SQ

1/4GG-SQ-12SQ 1/4GG-SQ-I12SQ 1/4GG-SQ-SS12SQ                1/4GG-SQ-316SS12SQ

Spray drying granulation process : First, the good by ball milling the slurry was further stirred tank Stir and heat to more than 35 ℃, and then apply pressure to a stirred tank , under the pressure of the slurry was sent to the atomizer , nebulizer after atomized into a spray tower from the lower portion of the tower body. The gas turbine is sent to the heat exchanger a gas distributor on top of the tower , after the gas distributor uniformly form the tower into the cyclone -shaped , the atomized slurry was granulated and dried . After the pellets and the hot gas contact surface of the liquid will evaporate quickly , and the internal gas in a subsequent drying process to migrate to the surface of the hot gas is taken away . The dried pellets fall to the bottom of the tower , be recovered through a pair of gap-type butterfly valve . After drying the slurry gas containing a small amount of hexane, and after vaporization of fine dust , the gas is supplied to the first cyclone pressure blower , wherein the preliminary separation of dust , condensation , and then supplied to a column leaching . In the leaching tower , get into the gas sufficiently washed with hexane and the gas contained in the gas is condensed , collected in the bottom of the elution column , washed again through the gas oil is sent to a heat exchanger for heating a gas , are repeated use . During operation the system remains slightly positive pressure state by a delivery valve and one exhaust valve automatic control.

1/4GG-SQ square spray nozzle has a removable vane inside ,which make it easy to clean.

Ordering information of 1/4GG-SQ square spray nozzle(YBS brand)

Materials: None=brass                  

               I=mild steel                   

               SS=303stainless steel（bar stock）

               316SS=316stainless steel（bar stock）

1/4 1/4GG-SQ-10SQ 1/4GG-SQ-I10SQ 1/4GG-SQ-SS10SQ                1/4GG-SQ-316SS10SQ

1/4GG-SQ-12SQ 1/4GG-SQ-I12SQ 1/4GG-SQ-SS12SQ                1/4GG-SQ-316SS12SQ