BESTPRESSⅠ

l Specifications l

• Mounting press
• Fully automatic cycle
• Water cooling system
• Temperature adjustable between 10 ℃ and 280 ℃
• Adjustable settings on touch pad
• Settings readable on LCD
• 18 preset processes
• 80 ℃ preheating process for well molded product
• Pressure adjustable between 100 and 200bar
• Maximum diameter : ø 50mm
• Possible to stop the piston at the required height
• Screw on cap lock
• Intermediate piston can perform 2 mounting operations
• Hydraulic technology
• Heating power 2k W
• Optional connector to plug recirculating tank and pump
• 220V 1phase, 50/60Hz

l Operating l

• cycle mounting press featuring an LCD screen and Touch pads to allow the user to adjust and check
  all functions and save new mounting settings.
• The LCD and touch pad control is easy and pleasant to use. The automatic cycle is activated by just
  one touch of the AUTO switch.
• The following settings may be adjusted and saved via the LCD and touch pads
• Heating temperature
• Heating time
• Cooling time
• Oil pressure
• Mold diameter
• Resin quality
• Material to be mounted.
• The BESTPRESS 1 uses precise hydraulic technology allowing the piston to stop anywhere and seal off
  the specimen in the middle.
• Precise screw type cap locking shows the quality of Ssaul technology.
• Changing the mold is simple and quick. The height of the machine makes it possible to perform two
  mounting operations simultaneously by using the intermediary position.
• The new heating and cooling design makes it possible to change the heating element separete from
  the cooling system, thereby minimizing maintenance costs.
• To comply with the most recent environmental standards, there is an option to connect a pump and tray
  in order for operations to take place within a closed circuit.

Width : 406mm
Depth : 497mm
Height : 440mm
Weight : about 40kg