Introduction

Need of sprinkler

1. Formation of all-weather agricultural basis - plowing and seeding at the desired time, labor reducible by irrigation prior to harvesting
2. High quality of crops and water supply increased by 20~50% at timely irrigation
3. Diversity of use - Irrigation, scattering of liquid manure, harmful insects and pest control, prevention of frostbite injury and seawater damage, etc.
4. Production cost reduced by decreased labor manpower, contribution to increasing the farmers'income

Common features of product

1. Convenient use, excellent functions, without failure even at long-term use, inexpensive
2. Excellent precision water sprinkling, convenient assembling
3. Safe product eliminating discomfort from aging farmhouses, convenient assembling, precision water sprinkling, excellent durability, etc.

Specification

	No.1 Set (K-200 Plug set)
	K-200 sprinkler set installed for low pressure using agricultural water duct. Water duct + main pipe connected Main pipe : 25A~50A PE pipe or water supply hose Main pipe + branch pipe valve set connected Branch pipe : 15A high-pressure hose or LD pipe K-200 sprinkler No.1 set installed Installing space : 4m x 4m, 5m x 5m all directions 130~210 sets required per 3,300m2
	No.2 Set (K-300 support ring or band used)
	Installed at pumps, ground water, and agricultural water duct Main pipe connected Main pipe : 25A~50A PE pipe or water supply hose Main pipe + branch pipe valve set connected Branch pipe : 25A water supply hose K-300 sprinkler No.1 set installed Installing space : 8m~12m all directions according to water discharge capacity 22~55 sets required per 3,300m2
	No.3 Set (K-300 support water supply socket)
	Installed at pumps, ground water, and agricultural water duct Main pipe connected Main pipe : 25A~50A PE pipe or water supply hose Main pipe + branch pipe valve set connected Branch pipe : 25A water supply hose K-300 sprinkler No.1 set installed Installing space : 8m~12m all directions according to water discharge capacity 22~55 sets required per 3,300m2
	No.4 Set (K-300 support tightening type)
	Installed at pumps, ground water, and agricultural water duct Main pipe connected Main pipe : 25A~50A PE pipe or water supply hose Main pipe + branch pipe valve set connected Branch pipe : 25A water supply hose K-300 sprinkler No.1 set installed Installing space : 8m~12m all directions according to water discharge capacity 22~55 sets required per 3,300m2
	No.5 Set (K-300 pillar-type water supply T set)
	Installed at pumps, ground water, and agricultural water duct Main pipe connected Main pipe : 25A~50A PE pipe or water supply hose Main pipe + branch pipe valve set connected Branch pipe : 25A water supply hose K-300 sprinkler No.1 set installed Installing space : 8m~12m all directions according to water discharge capacity 22~55 sets required per 3,300m2
	No.6 Set (K-300 pillar-type tightening one-touch set)
	Installed at pumps, ground water, and agricultural water duct Main pipe connected Main pipe : 25A~50A PE pipe or water supply hose Main pipe + branch pipe valve set connected Branch pipe : 25A water supply hose K-300 sprinkler No.1 set installed Installing space : 8m~12m all directions according to water discharge capacity 22~55 sets required per 3,300m2

Sprinkler construction method

- Assemble in the following sequence at installation for use

Material estimation and installing method

1. Decide pumps, ground water, agricultural water duct, etc. →
2. Calculate area of the field in width(m) x length(m). →
3. Decide the main pipe, the branch pipe, and the type of sprinkler set. →
4. Connect the main pipe to the water outlet. →
5. Install the main pipe. →
6. Install the main pipe + branch pipe valve set. →
7. Install the branch pipe. →
8. Install the sprinkler set →
9. Test run →
10. Installation completed

Tip

Install the sprinkler, decide main use, and fully examine prior to installation.
Subsequently, type of sprinkler and piping will vary, influencing the unit price of materials.