Bunched Cable Vertical Flame Spread Tester

Bunched Cable Vertical Flame Spread Tester


Negotiable Min Order Quantity Unit

Required Quantity
Place of Origin
Payment Terms
Negotiable
Production method
Negotiable
Shipping / Lead Time
Negotiable / Negotiable
Keyword
Category
Testing Equipment

Festec International Co., Ltd.

Country / Year Established
South Korea South Korea /
Business type
Others
Verified Certificate

11

DUNS

Product name Bunched Cable Vertical Flame Spread Tester Certification -
Category Testing Equipment Ingredients -
Keyword - Unit Size -
Brand name - Unit Weigh -
origin Stock -
Supply type - HS code -

Product Information

Bunched Cable Vertical Flame Spread Tester, VFT-716, IEC 60332-3, KS C IEC 60332-3-10, 21~25

Introduction

FESTEC's Bunched Cable Vertical Flame Spread Tester is a series conforming to IEC 60332-3-10, KS C IEC 60332-3-21~25 (Category A~D) standards. The test measures the expansion of vertical flame to the electronically or optically vertical cable or wire using the standard ignition source while supplying a certain amount of air to a chamber of a defined volume.
Additionally, if bunched cable vertical flame spread tester's burner is adjusted by 20 degrees angle, it can be measure under IEEE 383(IEEE 1202) standard. Also, if Heat Release Facility is attached, it can measure fire dynamics value as H.R.R (Heat Release Rate), S.P.R (Smoke Production Rate) and so on.

Standard

  • IEC 60332-3-10 : Test on Electric cables under fire conditions part 3 : Test on bunched wires or cables
  • EN 50399 : common test methods for cables under fire conditions
  • KS C IEC 60332-3-21 : Category A F/R
  • KS C IEC 60332-3-22 : Category A
  • KS C IEC 60332-3-23 : Category B
  • KS C IEC 60332-3-24 : Category C
  • KS C IEC 60332-3-25 : Category D

Features

  • Test chamber has the dimension of 1,000±100(W) x 2,000±100(D) x 4,000±100(H)mm. The bottom surface of the test chamber is higher than the ground while the rear side is supplemented with insulated material to insulate it from heat.
  • At the lower section of the test chamber, there is a 800±20(W) x 400±10(D) sized hole at the 150±10mm position from the front side of the chamber to supply the air.
  • There is a 300±30(W) x 1,000±100(D) sized exhaust hole at the rear corner of the top section of the test chamber to allow emission of the smoke during the test.
  • A flame trap is installed at the front side of the burner of the vertical flame spread tester to prevent backfire by propane to ensure the utmost safety.
  • Unlike the conventional IEC60332-3 equipment, the vertical flame spread tester records all control and test conditions with the computer to add user friendliness.
  • The air and gas flow rate to the burner must be compensated for the temperature and pressure. While many conventional systems ignore such compensation, the equipment from FESTEC International automatically compensates it by the computer program.
  • If stop the excessive combustion test due to Water Spray device installed for extinguish.
  • The program on the requirement on standard and 70,000Btu/h can be program.
  • Follow the standard category can program for select a test.

Specification

Model FT-VFT-716
Size 1,165(W) x 2,165(D) x 4,350(H)mm
Size(Control) 600(W) x 750(D) x 1600(H)mm
Power AC 220V, 50/60Hz, 15A
Weight 1500kg
Manual Supply
Exhaust 5,000L/min(inlet), 25m3/min(extraction)
Utilities Propane Gas, Compressed Air, Water(option), Dust Collector

Test Result

  • Flameout Time
  • Chamber Average Temperature
  • Max. Chamber Temperature
  • Min. Chamber Temperature
  • Burner Average Temperature
  • Max. Burner Temperature
  • Min. Burner Temperature
  • Average Inlet Flow(L/Min)
  • Average Outlet Flow(m/sec)
  • Average Heat Energy
  • Total Gas Flow rate
  • Add photo feature of carbonization area(length)

B2B Trade

Price (FOB) Negotiable transportation -
MOQ Negotiable Leadtime Negotiable
Payment Options Negotiable Shipping time Negotiable

Festec International Co., Ltd.

Country / Year Established
South Korea South Korea /
Business type
Others

11

DUNS

President
Festec International Co., Ltd.
Address
#801, 814, Byuksan Digital Valley 5, 244, Beotkkot-ro, Geumcheon-gu, Seoul, Korea
Product Category
Testing Equipment
No. of Total Employees
51-100
Company introduction

The corporate name FESTEC, as an abbreviation of Fire Engineering & Science Technology, reflects our intention to be a leader in the field of fire engineering and science by devoting ourselves to accumulating fire-related technologies to prevent human beings from economic loss and bodily injury by a fire.
Further, FESTEC will expand the business into research of advanced fire technology, certification service, and development of materials and test methods.
 
Bodily injury and economic loss from fire are being more emphasized in advanced countries. Therefore flame-retardancy and fire-resisting products shall be subject to conformity test to relevant standards, for example, interior finish materials of railway vehicles and buildings, fire-resistant cable etc. are included.
 Therefore, conformity to standards shall be rated with our test equipment, although our fire test equipment market depends upon foreign test equipment, at present. Like this, FESTEC INTERNATIONAL's growth has a thread of connection with national policy.
 
For any inquiries about our products, we will sincerely respond to you all the time.

Main Product

Related Products

Other buyers also search

Membership Grade

BUYER

Biz Pro VIP

SELLER

Biz Pro VIP
팝업닫기
Live Chat A new message arrives
from a business partner.

No Data

  • There is no data to load
  • Check out the My TK > My Inquiries list.
  • After agreeing to the use of the Live Chat service, the list is printed only when there is at least one history of receiving or sending a Live Chat request.

If you have not yet agreed to use the Live Chat service,

You can use the Live Chat freely after agreeing to the use of the Live Chat service.

View more
View more