The Heat Pipe series solar collector connected with existing heating supply device. The selective coating on the inner Cover of the evacuated tubes converts solar energy into heat energy and transfers heat to the heat pipes by aluminium fins. The liquid in the heat pipe changes into vapour which rises to the condenser. The heat then passes through the heat exchanger and The vapour becomes liquid, returning to the base of the heat pipe. The heat conducts to the heat transfer liquid (anti-freezing liquid or water) via a copper pipe. This transference of heat into the liquid creates a continuous circulation as long as the collector is heated by the sun. The Solar Collector can be installed both on pitched roof and flat roof. All necessary roof brackets and supporting frames are provided with solar collector.     Specifications

• Copper heat pipes for rapid heat transfer
• Insulation Rock wool
• Suitable for mains pressure water (working pressure: 6 bar)
• Corrosion resistant T2 copper pipe in the manifold
• All Aluminum alloy frame and manifold cover
• Stable solar conversion throughout the day
• The perfect solar collector for domestic solar water heater systems
• Ideal for commercial solar water heating applications

  Mechanical and hydraulic data
  Working temperature: from -50 C to +100 C		Recommended flow rate: 0.1-0.2 L/min/tube
  Maximum working pressure: 0.6 Mpa		Maximal flow rate: 1 L/min/tube
  Optimal angle: 0 - 70 Deg. Vertical		Hydraulic connections: copper pipe - nominal Ø22mm