Feature & Advantages

• Strong Power, Quick drying (hardening) Ability
• Environment-friendly UV LED safe to the skin and proved was applied
• Easy operating System (automatic recognition – movement – completion)
• C/S cost saving owing to stable quality
• User-oriented ergonomics design embodied

Strong Power, Quick drying (hardening) Ability

• Strong Power
  - As a 1W class SMD Type UV Power LED is built-in, drying speed is very quick, and time saving and work efficiency improved
• Quick drying (hardening) ability: GEL drying within 20~30 seconds
  - ES-100 (for home:
  . 6 pieces of 1W POWER LED, 6W) : Drying for both the Base and manicure is possible within 30, 45 seconds respectively

* Existing product: Mostly less than 3~4W

Environment-friendly UV LED safe to the skin and proved was applied
- Enfren GEL Dryer applied the SMD type UV Power LED of 405nm frequency :
. Since the UV-A (320-400nm), UV-B (290-320nm) emitted from the existing UV fluorescent are not discharged, it is safe to the skin

UV POWE LED Remarkable Advantages

1. Eco-friendly LED lighting : LED is eco-friendly as it does not use heavy metal such as mercury etc unlike the fluorescent
2. Drying is fast and strong as a light efficiency is high. : Light efficiency is 3~5 times higher compared to the UV fluorescent
3. Many long hours use is possible as its life span is long : Since the LED life span is about 50,000 hours, it is possible to use 6~8 times as long as the UV fluorescent
4. Irradiating range is wider with the light dispersion angle against the existing lamp type LED. : The lamp type is about 60°, but the SMD type is over 2 times wider with maximum 144°
5. Inferiority is few and safety is high by the use of small number of LEDs. As it use only minimum 1/5~maximum 1/10 level compared to the lamp type, inferiority is low and cost loss caused by replacement is small

Easy operating System

Touch Sensor automatic movement method adopted A system that once the hand is naturally put at the product's lower part, it automatically recognize and move was embodied (automatic recognition – movement – completion)
 

• As it equipped with a static capacity method touch sensor that moves after sensing the electric current running in a man's body, it is possible to use without wrong functioning from static electricity or outside influence irrespective of day & night
• It is normally operating even if it is stained with manicure, foreign substance etc or contaminated
• As a Timer is built-in, it automatically close after operating

C/S cost saving owing to stable quality

• Aluminum material LED PCB applied
  : LED life span improvement and reliability improvement on account of the aluminum PCB use of superior heat protection structure
• Use of the exclusive LED Driver IC
  : Product's safety improvement through static current supply

User-oriented ergonomics design embodied

(LED Placement Drawing) 

• LED position is adjusted different to each other considering the user's convenience, position and angle of the thumb
  : thumb LED is arranged at a right angle (90°) to left & right respectively
• Stand-by/movement: Indication LED is arranged on the product's upper part

Specification

Details